Page 1
67” ISADORA
DOUBLE ACRYLIC
SLIPPER TUB
L: 67”
W: 29-½”
H: 24” (from floor) short end
30” (from floor) tall end
18” (from bottom of tub) short end
24” (from bottom of tub) tall end
Water Depth: 11-½” to OF
Cat. No.
ADTS67
Feat
ures:
►Smooth white acrylic surface inside and out
►Double-walled acrylic
►No faucet holes
►Pre-drilled overflow hole
►Aluminum ball and claw feet
►Tubs ship with feet attached and leveled
►Tubs are thoroughly inspected before shipment
Foot
Finishes:
BQ Bisqu
BL Black CP Polished Chrome
BP Polished Brass PN Polished Nickel
ORB Oil Rubbed Bronze WH White
Custom Colors Available (inside of tub is always white enamel):
Painted bathtubs are considered “special order” and are not returnable
$160 Bisque or Black $250 Designer Color
e BN Brushed Nickel
The
following is recommended for
ADTS67 slipper tubs:
•Faucets: part #4602, #7393, or # 7410
•Freestanding Bath Supplies: #4502-PL
•Leg tub drain: part #5599
Ga
llon Capacity: 50
Shipping Weight: 150 lbs.
Empty Weight: 100 lbs.
Filled Weight: 518 lbs.
Dimensions are nominal and specifications subject to change without notice.
09
/21/2018
P
847•244•1234 www.barclayproducts.com
Page 2
TUB WALL MOUNT
Cat. No.
FILLER WITH
HANDSHOWER
4602
F
eatures:
►Brass construction
►Elephant spout length is 5-¾”
►Flow rate is 3.7 GPM
►Available with porcelein lever (4602-PL) or
metal cross handles (4602-MC)
►Telephone handshower with cradle and hose
►Handshower flow rate 2.5 GPM
►Handshower includes backflow preventer
►Swivel mounts adjust centers from 3” to 12”
►Faucet centers are 7” without swivel mounts
►For tub wall mount installation
►¼ turn ceramic disc cartridges
►IAPMO approved
►To be used with double offset bath supplies, Part #5576
►This faucet can also be used with rigid freestanding
supplies, Part #4502 with adjustable swivel mounts removed
Adjustable Swivel Mounts
Fi
nishes:
P Polished Brass SN Brushed Nickel
B
CP Polished Chrome PN Polished Nickel
ORB Oil Rubbed Bronze
Dime
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 3
FREESTANDING
Cat. No.
BATH SUPPLIES
4502-PL
Features:
►5” Shaft included ►0.800” Outer diameter
►Stops included ►0.595” Inner diameter
►½” Pipe thread inlet ►0.090” Thickness of wall
►¾” Flare outlet
►Wall support assemblies included
►Porcelain lever handles
►IAPMO approved
►Available in 5 finishes
►Should not be used with leg tubs that have factory
drilled holes.
Finishes:
CP Polished Chrome
PN Polished Nickel
BP Polished Brass
ORB Oil Rubbed Bronze
SN Brushed Nickel
H: 30” (30-½” with nut)
Wall Support
Assembly
Use on concrete floors requires special installation. We recommend using a plumbing proffessional.
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
Dime
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 4
LEG TUB
Cat. No.
DRAIN
5599
Features:
►Twist-and-lift stopper
►Includes deep escutcheon
►Height adjustable 15”-18”
►Depth adjustable 12”-14”
►Includes deep escutcheon
►IAPMO approved
►Available in 5 Finishes
Finishes:
C
P Polished Chrome
BP Polished Brass
SN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Escutcheon Height: 1-¼”
Dime
nsions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Loading...