Page 1
CADMUS
68” CAST IRON
ROLL TOP TUB
WITH 7” DECK HOLES
L: 68”
W: 30-½”
H: 23-¼” (from floor to top of tub)
18-⅝” (from bottom of tub to top
of tub)
Cat. No.
CTR7H67
Features:
Features:
►Inside finish is white enamel
►Inside finish is white enamel
►Cast Iron ball and claw feet available in 8 finishes
►Cast Iron ball and claw feet available in 8 finishes
or unfinished
or unfinished
►Tub exterior is white (epoxy)
►Tub exterior is white (epoxy)
►7” centers in tub deck
►7” centers in tub deck
►Non-skid strips
►Non-skid strips
►Feet attached and leveled before shipment
►Feet attached and leveled before shipment
►Tub thoroughly inspected before shipment
►Tub thoroughly inspected before shipment
Foot Finishes:
UF Unfinished
BL Painted Black
BQ Painted Bisque
PB Polished Brass
CP Polished Chrome
WH Painted White
PN Polished Nickel
SN Brushed Nickel
ORB Oil Rubbed Bronze
The following is recommended for
CTR7H67 tubs with deck holes:
•Rim-mounted faucet: part #4601 or 4201
•Straight bath supplies: part #5577
•Leg tub drain: part #5599
•Complete shower unit: part #4063
Gallon Capacity: 57
Shipping Weight: 502 lbs.
Empty Weight: 309 lbs.
Filled Weight: 785 lbs.
Custom Colors Available (inside of tub is always white enamel):
Painted bathtubs are considered “special order” and are not returnable
$160 Bisque or Black $250 Designer Color
Dimensions of fixture are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. Dimensions and
specifications subject to change without notice.
09/26/2018
P 847•244•1234 www.barclayproducts.com
Loading...