Page 1
60”ANDOVER
ACRYLIC
ROLL TOP TUB
L: 60”
W: 30”
H: 24-½” (from floor)
17-¾” (from bottom of tub)
Water Depth: 11-½” to OF
Cat. No.
ATR60
Fe
atures:
►Inside finish is either white or bisque to
match outside color
►Pre-drilled overflow hole
►3-⅜” centers in tub wall with continuous rolled rim
►Top of tub to center of faucet holes is 3-¼”
►Outside is textured fiberglass reinforced polyester
coated with two-part epoxy
►Cast aluminum ball and claw feet
►Feet are attached and leveled before shipment
►Tub is thoroughly inspected before shipment
ub Colors
T
H White BQ Bisque
W
The
following is recommended for
ATR60 tubs:
•Tub wall-mounted faucets: #4022,4025 or 4035
•Double offset bath supplies: part #5576
•Leg tub drain: part #5599
Do Not Use with rigid, freestanding
supplies.
Gal
lon Capacity: 40
Shipping Weight: 110 lbs.
Empty Weight: 62 lbs.
Filled Weight: 396 lbs.
Foot Finishes
BQ B
BL Black ORB Oil Rubbed Bronze
PB Polished Brass PN Polished Nickel
CP Polished Chrome WH White
Custom Colors Available (inside of tub is always white enamel):
Painted bathtubs are considered “special order” and are not returnable
$160 Bisque or Black $250 Designer Color
isque BN Brushed Nickel
Dimensions of fixture are nominal and specifications subject to change without notice.
09/24/2018
P
847•244•1234 www.barclayproducts.com
Page 2
RECTANGULAR
Cat. No.
SHOWER UNIT WITH
SIDE WALL SUPPORT
4192
atures:
Fe
►Rectangular shower rod is 3/4” solid brass tubing
►Washerless diverter bathcock
►3-3/8” Centers for tub wall mount installation
►1/4 Turn compression stems
►Flow rate is 4 GPM
►Metal lever handles
►Polished Chrome and Brass have plastic showerheads
►Brushed Nickel, Polished Nickel and Oil Rubbed Bronze
have a metal showerhead
►Includes ceiling and wall support assemblies
►Side wall support fully reversible (Left or Right)
►Supports adjustable by cutting
►For use with #5576 double offset supplies (Not Included)
►Available with 48” (#4192-48) or 54” (#4192-54)shower rod
►Finishes varies by size
SIZE FINISH
48” x 24” CP, BN, ORB,PB, PN
54” x 24” PB, CP
Shower Rod:
L: 48” D: 24”
L: 54” D: 24”
Riser Height: 62”
Faucet Width: 5-1/4”
Wall Support: 18”
Ceiling Support: 30”
hes:
Finis
CP Polished Chrome
PB Polished Brass
BN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Dime
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 3
DOUBLE OFFSET
Cat.No.
BATH SUPPLIES
H: 24”
5576
Features:
►For use with faucets mounted to the tub wall
►No Stops
►½” Compression inlet
►¾” Compression outlet
►0.500” Outer diameter
►0.440” Inner diameter
►0.030” Thickness of the wall
►IAPMO approved
►Availble in 5 finishes
Finishes:
CP
Polished Chrome PN Polished Nickel
PB Polished Brass BN Brushed Nickel
ORB Oil Rubbed Bronze
Compliance Certification
Meets or exceeds the following
specifications: ASME-A112
(and 19.6M) for Vitreous china
fixtures. ASME 112.19.9M for fire
clay fixtures.
OD: ½”
Use on concrete floors requires special installation. We recommend using a plumbing proffessional.
nsions and specifications subject to change without notice.
Dime
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 4
LEG TUB
Cat. No.
DRAIN
5599
Features:
►Twist-and-lift stopper
►Includes deep escutcheon
►Height adjustable 15”-18”
►Depth adjustable 12”-14”
►Includes deep escutcheon
►IAPMO approved
►Available in 5 Finishes
Finishes:
C
P Polished Chrome
BP Polished Brass
SN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Escutcheon Height: 1-¼”
Dime
nsions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Loading...