Page 1
IMOGENE ACRYLIC
Cat. No.
SLIPPER TUB
L: 67”
W: 29-½”
H: 24” (from floor) short end
30” (from floor) tall end
18” (from bottom of tub) short end
24” (from bottom of tub) tall end
Water Depth: 11-½” to overflow
ATS67
F
eatures:
►Outside is textured fiberglass reinforced
polyester coated with two-part epoxy
►Aluminum ball and claw feet
►No faucet holes
►Pre-drilled overflow hole
►Feet are attached and leveled before shipment
►Tub is thoroughly inspected before shipment
Foot Finishes:
BL Black
BQ Bisque
BP Polished Brass
CP Polished Chrome
BN Brushed Nickel
ORB Oil Rubbed Bronze
PN Polished Nickel
WH White
The following is recommended for
ATS67 slipper tubs:
•Faucets: part #4602, 4604 or 7082
•Use with Freestanding Bath Supplies:
part #4502
•Leg tub drain: part #5599
Ga
llon Capacity : 50
Shipping Weight: 150 lbs.
Empty Weight: 100 lbs.
Filled Weight: 518 lbs.
Custom Colors Available (inside of tub is always white enamel):
Painted bathtubs are considered “special order” and are not returnable
$160 Bisque or Black $250 Designer Color
Dimensions of fixture are nominal and specifications subject to change without notice.
9/26/2018
0
P
847•244•1234 www.barclayproducts.com
Page 2
TUB WALL MOUNT
Cat. No.
FILLER WITH
HANDSHOWER
4602
F
eatures:
►Brass construction
►Elephant spout length is 5-¾”
►Flow rate is 3.7 GPM
►Available with porcelein lever (4602-PL) or
metal cross handles (4602-MC)
►Telephone handshower with cradle and hose
►Handshower flow rate 2.5 GPM
►Handshower includes backflow preventer
►Swivel mounts adjust centers from 3” to 12”
►Faucet centers are 7” without swivel mounts
►For tub wall mount installation
►¼ turn ceramic disc cartridges
►IAPMO approved
►To be used with double offset bath supplies, Part #5576
►This faucet can also be used with rigid freestanding
supplies, Part #4502 with adjustable swivel mounts removed
Adjustable Swivel Mounts
Fi
nishes:
P Polished Brass SN Brushed Nickel
B
CP Polished Chrome PN Polished Nickel
ORB Oil Rubbed Bronze
Dime
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 3
FREESTANDING
Cat. No.
BATH SUPPLIES
4502-PL
Features:
►5” Shaft included ►0.800” Outer diameter
►Stops included ►0.595” Inner diameter
►½” Pipe thread inlet ►0.090” Thickness of wall
►¾” Flare outlet
►Wall support assemblies included
►Porcelain lever handles
►IAPMO approved
►Available in 5 finishes
►Should not be used with leg tubs that have factory
drilled holes.
Finishes:
CP Polished Chrome
PN Polished Nickel
BP Polished Brass
ORB Oil Rubbed Bronze
SN Brushed Nickel
H: 30” (30-½” with nut)
Wall Support
Assembly
Use on concrete floors requires special installation. We recommend using a plumbing proffessional.
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
Dime
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 4
LEG TUB
Cat. No.
DRAIN
5599
Features:
►Twist-and-lift stopper
►Includes deep escutcheon
►Height adjustable 15”-18”
►Depth adjustable 12”-14”
►Includes deep escutcheon
►IAPMO approved
►Available in 5 Finishes
Finishes:
C
P Polished Chrome
BP Polished Brass
SN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Escutcheon Height: 1-¼”
Dime
nsions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 5
“D” SHAPED
Cat. No.
SHOWER ROD
4145
Fea
tures:
►1” Solid brass tubing
►Includes rectangular flanges( #300)
►Includes two “D” rod loop connectors (#331)
►Available In 3 Sizes: 48”, 54”, and 60”
(#4145-48, #4145-54, and #4145-60)
►All rods come as four pieces
►Ceiling Supports Available ( #340)
►Available in 5 finishes
F
inishes:
“D” Rod Loop Connector
Rectangular Flange
Polished Chrome
CP
SN Brushed Nickel
BP Polished Brass
ORB Oil Rubbed Bronze
PN Polished Nickel
Measurements Show Different
Lengths For Each Size Rod.
Dime
nsions are nominal and may vary. Dimensions and specifications are subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Loading...