Page 1
INSTALLATION INSTRUCTIONS
P 847•244•1234 www.barclayproducts.com
9-19-17
Installation Instructions
1. Turn off the water supply.
2. Determine the location for your faucet and drill a 2” hole in
the floor.
3. Connect braided hoses to faucet.
4. Position the faucet and push the hoses through the hole in the floor.
5. Secure the faucet to the floor by screwing down the fixing ring with
the screws provided.
6. Connect the water supply to the the braided hoses.
7. Secure the spout to the body of the faucet.
Cleaning Instructions
Wipe this whole set off with warm water and a soft cloth. DO NOT use
soaps, cleansers, or brass cleaners as they will disintegrate the protective
lacquer coating and leave the brass exposed causing it to tarnish.
Parts Included
Spout • Cover plate • Floor fixing screws • 2 Braided hoses (1/2” NPT)
Handshower w/hose
Freestanding
Tub Filler with
Hand Shower
Tools Needed
• Adjustable Wrench • Slip Joint Pliers • Pipe Putty or Teflon Pipe Tape • Screwdriver
Cat. No.
7918
Loading...