Barclay ATR60WHCP, ATRN58WHPB, ATRN53WHORB, ATSN61LPWHPB, ATSNTD61IWHPB User Manual

Barclay Products Limited ▪ 4000 Porett Drive ▪ Gurnee IL 60031 ▪P800-446-9700 ▪F847-244-1259 ▪ www,barclayproducts.com

ACRYLIC TUB FACTS & CARE

Care and Maintenance

The non-porous surface of an acrylic tub makes it very easy to keep clean. For
routine cleaning you may use a non-abrasive soap. Dishwashing detergent such as
Joy®, Palmolive®, Ivory®, etc and a soft sponge or cloth is all that you need. If an
accident occurs that requires something stronger, the following are SAFE to use:
Fantastic®, Tackle®, Top Job®, Formula 409®, ScrubFree®, Calgon Bath®, Windex®,
Clorox Bleach®, Spiffits® Bath, Glass Plus®, and Spic & Span Powder®.

DO NOT Clean Your Acrylic Bathtub with Paint Thinner, Goof OFF®, Scrubbing
Bubbles®, Acetone, Lacquer Thinner, M.E.K. ® or other chemicals that attack the
structural integrity of plastics (including, but not limited to, acetones). Use of these
chemicals will destroy the acrylic surface of your bathtub and there is no way to
reverse the damage caused by this type of chemical reaction. Use of these chemicals
will void your warranty.

It is simple to restore the finish of your tub, should scratches or dulling occur. We
recommend the use of a liquid polisher such as Gel-Gloss®. Deep scratches or burns
can be removed with very fine sandpaper (600 grit or higher) and then finished with a
liquid polish.

Our acrylic soaker tubs are a fiberglass
re-inforced polyester, finished inside with a
durable sheet of acrylic. The rough fiber
glass exterior is coated with an epoxy paint
in either white or bisque to match the
interior.

Our new double acrylic tubs boast 2 sheets
of acrylic wrapped around a durable fiber
glass core for a sleek finish inside and out.
All acrylic tubs are protected by a thin sheet
of film during shipment.

Vacuum molded acrylic claw foot tubs are a
light-weight, economic alternative for those
who do not have the structural requirement

for a cast iron tub.