Barclay 7901CP Installation Manual

Freestanding
Tub Filler with

Hand Shower

(1) Spout • (2) Collar nut • (3) Cover plate • (4) 4 Floor fixing screws • (5) 2 Braided hoses (1/2” NPT)

• Adjustable Wrench • Slip Joint Pliers • Pipe Putty or Teflon Pipe Tape • Screwdriver

Installation Instructions

1. Turn off the water supply.

Cat. No.
7901, 7913

INSTALLATION INSTRUCTIONS

Parts Included

(6) Fixing ring • (7) Handshower w/hose

Tools Needed

2. Determine the location for your faucet and drill a 2” hole in

the floor.

3. Connect braided hoses to faucet.

4. Position the faucet and push the hoses through the hole in the floor.

5. Secure the faucet to the floor by screwing down the fixing ring with

the screws provided.

6. Connect the water supply to the the braided hoses.

7. Use the collar nut to secure the spout to the body of the faucet.

Cleaning Instructions

Wipe this whole set off with warm water and a soft cloth. DO NOT use soaps, cleansers, or brass cleaners as

6/8/10

P 847•244•1234 www.barclayproducts.com