BAPI Wall Plate with Rotary Setpoint Catalog Page
A32
Wall Plate with Rotary Setpoint
*
Temperature Sensors
Features & Options
l Stainless Steel Wall Plate
l Rotary Setpoint Adjustment
l Occupant Override Pushbutton (optional)
l 3.5 mm Communication Jack (optional)
l Pressure Pickup Port (optional)
l Wide Selection of Temperature Sensing Elements
l Limited Lifetime Warranty
Rotary Setpoint & Legend
The Rotary Setpoint is a linear adjustment that comes in
various ranges, and is available as reverse or direct acting. A
Setpoint Legend can be imprinted on the face of the Wall Plate.
The standard legends is “–” to “+”. Custom legends are also
available, please call BAPI for details.
Override Pushbutton
The optional Override is a discreet momentary signal that can
be congured to be compatible with any controller. It is available
in three styles — Standard, Durable or Low Prole (with or
without an LED override indicator). All Low Prole pushbuttons
are water resistant for washdown/wipedown cleaning.
Communication Jack
An optional 3.5 mm phono plug style comm. jack is also
available.
Pressure Pickup Port
An optional Pressure Pickup Port is also available.The brass
tting on the back accommodates 1/8” to 5/32” tubing.
Note: Choosing two or more options in addition to the Rotary
Setpoint requires a doublegang enclosure.
*All Passive Thermistors 20KΩ and smaller are CE compliant.
04/27/15
Rotary
Setpoint
and “-”
to “+”
Legend
Rotary
Setpoint and
Low Prole
Override
(-O2)
Doublegang Unit with Rotary
Setpoint, Override with LED,
Comm. Jack and Pressure
Pickup Port
Specications
Material: Stainless Steel
Environmental Operation Range:
Temp: -20 to 60 oC
Humidity: 0 to 95%, non-condensing
Single
Gang
Double
Gang
Wall Plate with Rotary Setpoint
Ordering Information Wall Plate with Rotary Setpoint
List Your
BA/ Price Order
Thermistors
$18 Each $_______
RTD's
$25 Each
or $_______
$35 for 1K[NI]
Semi-
conductors
100K
100K Ω @ 25 °C
$25 Each $_______
$50 $_______
## Legend Range Designator
+/-
Z
Other Setpoint Legends are Available, call BAPI for details.
SETPOINT OUTPUT VALUE RANGE (insert Designator #)
Desired Range Designator Desired Range Designator
0 to 5 Volts* 00
2 k to 3 kΩ
42
1 to 5 Volts* 01 10 k to 11 kΩ 44
3.7 to .85 Volts* 02 12.5 k to 11.5 kΩ 45
5 to 0 Volts* 03 1000 to 0 Ω 46
4.2 to 1.2 Volts* 04
0 to 10 kΩ
60
2.75 to 3.34 V* 05 15 k to 5 kΩ 61
0 to 10 Volts* 10 1 k to 11 kΩ 63
674 to 274 Ω 23
0 to 20 kΩ
80
800 to 1200 Ω 25
4.75 k to 24.75 kΩ
81
909 to 1309 Ω 26
6.19 k to 26.19 kΩ
82
1800 to 2200 Ω 27
7.87 k to 27.87 kΩ
83
0 to 1000 Ω 40 10 k to 30 kΩ 84
-O
Standard Pushbutton Override Switch $10
$_______
-O1
Durable Style Pushbutton Override $24
$_______
-O2
Low Profile Style Pushbutton Override $57
$_______
-O2G5
Low Profile Pushbutton Override, Green LED, 5 VDC** $100
$_______
-O2G24
Low Profile Pushbutton Override, Green LED, 24 VDC or VAC** $100
$_______
-O2R5
Low Profile Pushbutton Override, RED LED, 5 VDC** $100
$_______
-O2R24
Low Profile Pushbutton Override, RED LED, 24 VDC or VAC** $100
$_______
-OWD
Washdown Keyswitch, NO & NC $230
$_______
-J Override as a Separate Input
-N Override in Parallel (//) with Sensor
-P Override in Parallel (//) with Setpoint
-Z No Override
-C35 3.5 mm Phono Style Jack
$10
$_______
-P01 Pressure Pickup Port
$5
$_______
-DBG Doublegang Enclosure
$15
$_______
-CG Common Ground
-DF Differential Inputs
BA/ 10K-2 -SP Z25 -O2 -J -C35 -CG
(Required if two or more options are selected in
Total =
$______
A33
04/27/15
Sensor Type (Required) Use the designator number (shown to the left in bold) to indicate the sensor
THERMISTORS
# 1.8K 1.8K Ω @ 25 °C 1K[375] 1K Ω Platinum @ 0 °C, 3.75 Ω/°C temp. coeff.
3K 3K Ω @ 25 °C 1K[NI] 1K Ω Nickel @ 21°C, 5 Ω/°C temp. coeff.
3.25K 3.25K Ω @ 25 °C (T30 type) 1K 1K Ω Platinum @ 0 °C, 3.85 Ω/°C temp. coeff.
3.3K 3.3K Ω @ 25 °C 2K 2K Ω Silicon @ 20 °C, 8 Ω/°C temp. coeff.
10K-2 10K Ω @ 25 °C
10K-3 10K Ω @ 25 °C SEMICONDUCTORS
10K-3[11K] 5,238 Ω @ 25 °C 592 AD592 Semiconductor, 273 µA @ 0 °C
20K 20K Ω @ 25 °C
50K 50K Ω @ 25 °C
Enclosure Configuration (Required)
-SP
Stainless Steel Wall Plate
Setpoint (Required) Must select Legend and Range
RTDs
SETPOINT LEGEND (insert Designator #)
Temperature Sensors
Optional Override Pushbutton Style Skip if not required
Override Configuration (Required)
Optional Communication Jack Skip if not required
Optional Pressure Pickup Skip if not required
Doublegang Enclosure
addition to the rotary setpoint)
Connection Configuration (Required)
Optional Security Screws
-SEC1 Spanner Security Screws
EXAMPLE
Example Part Number: BA/10K-2-SPZ25-O2-J-C35-CG
Your Part Number:
Call BAPI if you have questions about the above ordering/pricing grid or the configuration of the product you are ordering.
*For voltage output options: 5 VDC must be supplied for outputs of 5 VDC and below and 10 VDC must be supplied for the 0 to 10 VDC output.
**Voltage to power LED indicator (5 VDC or 24 VDC or VAC) must come from the controller or other external source.
Loading...