BAPI T1K Transmitter Room Unit Catalog Page

A22

T1K Transmitter Room Unit

Temperature Sensors

Features & Options

 Delta Style or BAPI-Stat 4 Enclosures

 4 to 20 mA Temperature Output

 Optional Display on the BAPI-Stat 4

 Optional Override and Setpoint on the BAPI-Stat 4

 Optional Communications Jack

 Two Year Warranty

The T1K Transmitter Room Unit comes in the Delta style
and BAPI-Stat 4 style enclosures. They measure the room
temperature and output a 4 to 20mA signal per the custom
range selected at the time of order.

The BAPI-Stat 4 Style unit offers a full range of options
including setpoint, override, display, communication jack,
fi eld offset, fi eld ranging, ºF or ºC and a new stylish look.

For detailed specifi cations on the T1K

Transmitter, turn to the Sensors section

Rev. 09/01/16

BAPI-Stat 4

Units with white

and gray logo

plate.

Delta Style Unit

(Not available with

Display, Setpoint,

Override or Comm.

Jack.)

Specifi cations

Power:

12 to 30VDC (28 VDC max. recommended)
Transmitter Output:

4 to 20mA, 600Ω to 850Ω@24VDC
Power Consumption:

40 mA maximum
Sensing Element:

1KΩ Platinum RTD
Environmental Operation Range:

Temperature, Delta: 32 to 122ºF (0 to 50ºC)
Temperature, BS4: 15ºF to 130ºF, (-9º to 54ºC)
Humidity: 0 to 95%, non-condensing

Mounting: Standard 2” by 4” J-box or drywall mount

(mounting screws provided)

Wiring: 1 to 3 pair of 16 to 22AWG, plus comm. jack
Options:

Comm. Jack ........ Optional 3.5mm (1/8”) Phono

Jack or RJ11 Phone Jack

Setpoint............... BS2 & BS4, Resistive or 4 to 20mA

Display ................ BS4, 3.5 digit, 2”W x 1.1”H

External Sensor .. BS2 & BS4, Remote Mounted RTD
Material & Rating:

BAPI-Stat 4 ........ ABS Plastic, UL94 V-0

Delta Style ......... ABS Plastic, UL94 HB

Agency: RoHS

Delta Style

Enclosure

BAPI-Stat 4

Enclosure

T1K Transmitter Room Unit

List Your

Price Order

Ordering Information T1K Temperature Transmitter Room Unit

BA/

Temperature Transmitter Type Must select one - Must include a Range

T1K[range]

1K Platinum RTD, 1,000 Ω @ 0 °C with 4 to 20 mA Output

$100 $_______

T1KM[range]

1K Platinum RTD, 1,000 Ω @ 0 °C with MATCHED* 4 to 20 mA Output

$280 $_______

Ranges for Temperature Transmitters

Custom temperature transmitter ranges are available. Common ranges are listed below

65 TO 80F

18 TO 27C

40 TO 90F 4 TO 32C

60 TO 80F

15 TO 27C

45 TO 96F 7 TO 35C

55 TO 85F

13 TO 30C

0 TO 100F -18 TO 38C

50 TO 90F

10 TO 32C

Enclosure Style Must select one

-R Delta Style Room Enclosure (Not available with Display, Setpoint, Override or Comm. Jack in the Delta Style Enclosure)

-B4S BAPI-Stat 4 Style Room Enclosure $50 $_______

LCD Display Must select one

D LCD Display (Only available for the BAPI-Stat 4 Style Enclosure) $35 $_______

X No LCD Display

Setpoint Display Options Must select one - Setpoint display only availablefor BAPI-Stat 4 units

- #

SETPOINT DISPLAY OPTIONS See page I3 for Additional Setpoint Display Ranges.

Desired Range

Designator

Desired Range

Designator

-2 to +2

P

65 to 80 °F or 18 to 27 °C

F

-3 to +3

A

45 to 96 °F or 7 to 36 °C

G

-5 to +5

B

70 to 74 °F or 21 to 23 °C

L

50 to 90 °F or 10 to 32 °C

C

60 to 85 °F or 15 to 30 °C

AA

55 to 85 °F or 13 to 30 °C

D

41 to 85 °F or 5 to 30 °C

CC

60 to 80 °F or 15 to 27 °C

E

No Setpoint Display

X

SETPOINT OUTPUT VALUE RANGE See page I2 for Additional Setpoint Output Ranges

$6 for $_______

Desired Range Designator

Desired Range

Designator

Setpoint

674 to 274 Ω 23

15 k to 5 kΩ

61

800 to 1200 Ω 25

0 to 20 kΩ

80

## 909 to 1309 Ω 26

4.75 k to 24.75 kΩ

81

1800 to 2200 Ω 27

6.19 k to 26.19 kΩ

82

0 to 1000 Ω 40

7.87 k to 27.87 kΩ

83

2 k to 3 kΩ 42

10 k to 30 kΩ

84

0 k to 10 kΩ

60

4 to 20 mA

16***

$60 for #16 $_______

SETPOINT LEGEND

Legend Range Designator

Legend Range

Designator

5 to 30 C

L1

65 to 80 F

L4

55 to 85 F

L2

COOL/WARM

L6

60 to 85 F

L3

No Legend

L0

-J Override as a Separate Input

$5 for any

$_______

-N Override in Parallel (//) with the Sensor (Only available for the BAPI-Stat 4 Style Units)

Override

-P Override in Parallel (//) with Setpoint

-Z No Override

-C11L RJ11 (4 pin) Style Jack with Leads Attached $20 $_______

-C11LT RJ11 (4 pin) Style Jack with Leads and a Terminal Block Attached $20 $_______

-C35L 3.5 mm (3 pin) Phono Style Jack with Leads Attached $10 $_______

-C35LT 3.5 mm (3 pin) Phono Style Jack with Leads and a Terminal Block Attached $10 $_______

-CG Common Return**

-DF Differential Inputs^ - Required for 4-20 mA setpoint

Optional External Sensor for BAPI-Stat 4

-ES External RTD Sensor (order separately)

BAPI-Stat 4 Logo Plate Color

-WMW Warm White Logo Plate Color

-GRY Gray Logo Plate Color

Total =

$______

A23

Rev. 09/01/16

Temperature Sensors

Note: Setpoint display range cannot be larger than the Temperature Transmitter range selected above.

Optional Setpoint If setpoint is selected, you must select a Range and Legend)

Override Configuration Must select one - Override not available for Delta Style Units

Optional Comm. Jack Skip if not required - Not available for Delta Style units

Connection Configuration Must select one

EXAMPLE

BA/ T1K[65 TO 80F] -B4S D -P 25L6 -J -C35L -CG -GRY

Example Part Number: BA/T1K[65 TO 80F]-B4SD-P25L6-J-C35L-CG-GRY

Your Part Number:

Call BAPI if you have questions about the above ordering/pricing grid or the configuration of the product you are ordering.
*Matched transmitters use Class A & are matched at 25%, 50% & 75% of calibrated scale
**There is a common between the setpoint and override if the setpoint is resistive.

***If 4-20 mA setpoint output range (#16) is selected, then the bottom of a vertical slider equals a setpoint output of 4 mA and the top on a vertical slider equals a 20 mA

setpoint output. The 4-20 mA setpoint can only be used with the –B4S enclosure sensor and requires a –DF (differential input) designation.

^Setpoint and Override terminals do not share a common connection