BAPI Low Profile "Button" Sensor Catalog Page

A16

Low Prole "Button" Sensor

*

Temperature Sensors

Features & Options

l Small Flush Sensor Mounting
l

Accurate Direct Air Measurement

l

Paintable with Latex or Oil Base

l

Wide Selection of Sensing Elements

l

Limited Lifetime Warranty

The Low Prole "Button" Sensor is ideal for locations
where aesthetics are as important as the temperature
measurement. The inconspicuous wall sensor
mounts easily by pushing through a 1/2" hole and
secured with a peel off tape strip. The only visible
portion is a ush 7/8" dot on the wall.

The Low Prole "Button" Sensor is available in white
or black with multiple thermistor or RTD sensors as
shown in the ordering grid. Other sensor types are
available on request.

* All Passive Thermistors 20KΩ and smaller are CE compliant.

Rev. 11/30/16

White and

Black Low

Prole “Button”

Wall Sensor

Specications

Thermistor

Temp. Output ............Resistance

Accuracy (Std) .........±0.36ºF, (±0.2ºC)

Accuracy (High) ........±0.18ºF, (±0.1ºC), [XP] option

Stability ....................< 0.036ºF/Year, (<0.02ºC/Year)

Heat dissipation .......2.7 mW/ºC

Temp. Drift ................ <0.02ºC per year

Probe range .............-40º to 221ºF (-40º to 105ºC)

RTD

Platinum (PT)............100Ω or 1KΩ @0ºC, 385 curve

Platinum (PT)............1KΩ @0ºC, 375 curve

PT Accuracy (Std) ..... 0.12% @Ref, or ±0.55ºF,

(±0.3ºC)

PT Accuracy (High) .. 0.06% @Ref, or ±0.277ºF,

(±0.15ºC), [A] option

PT Stability ..............±0.25ºF, (±0.14ºC)

PT Self Heating .......0.4 ºC/mW @0ºC

PT Probe range ....... -40º to 221ºF, (-40 to 105ºC)

Nickel (Ni) ................ 1000Ω @70ºF, JCI curve

Ni Probe range ........-40º to 221ºF (-40 to 105ºC)

Sensitivity

Thermistor ...Non-linear

Go to bapihvac.com “Sensor Specs”

RTD (PT) .....3.85Ω/ºC for 1KΩ RTD

3.75Ω/ºC for 1KΩ RTD

0.385Ω/ºC for 100Ω RTD

Nickel (Ni) ....2.95Ω/ºF for the JCI RTD

Wiring: Two or Three conductor, 22 AWG wires

Wire Insulation: Etched Teon, Plenum rated
Mounting: 1/2" hole, push in plastic sheath

with peel off tape strip.

Enclosure Ratings: NEMA 1
Encl. Material: Plastic, UL94
Ambient (Encl.)

0 to 100% RH, Non-condensing

-40ºF to 185ºF, (-40º to 85ºC)

Agency
RoHS, CE* (Thermistor’s < 20KΩ)

PT= DIN43760, IEC Pub 751-1983,
JIS C1604-1989

Low Prole "Button" Sensor

Ordering Information Low Profile "Button" Sensor - Temperature List Your

BA/ Price Order

THERMISTORS RTDs Thermistors

1.8K

1.8K Ω @ 25 °C

1K[375]

1K Ω Platinum @ 0 °C, 3.75 Ω/°C temp. coeff.

# 2.2K

2.2K Ω @ 25 °C

1K[NI]

1K Ω Nickel @ 21°C, 5 Ω/°C temp. coeff.

$18 Each $_______

3K

3K Ω @ 25 °C

1K

1K Ω Platinum @ 0 °C, 3.85 Ω/°C temp. coeff.

3.25K

3.25K Ω @ 25 °C (T30 type)*

2K

2K Ω Silicon @ 20 °C, 8 Ω/°C temp. coeff.

RTD's

3.3K

3.3K Ω @ 25 °C

$25 Each

10K-2

10K Ω @ 25 °C

or $_______

10K-3

10K Ω @ 25 °C

$35 for 1K[NI]

10K-3[11K]

5,238 Ω @ 25 °C*

10K-5

10K Ω @ 25 °C

20K

20K Ω @ 25 °C

30K

30K Ω @ 25 °C

47K

47K Ω @ 25 °C

50K

50K Ω @ 25 °C

100K

100K Ω @ 25 °C

Wall Mount Fitting

$7

$_______

$12

$_______

-5

5 feet of Plenum Rated Cable

$2 $_______

-10

10 feet of Plenum Rated Cable

$4 $_______

-15

15 feet of Plenum Rated Cable

$6 $_______

EXAMPLE

BA/ 10K-2 -LP

Total =

$______

A17

Rev. 11/30/16

Sensor Type Use the designator number (shown to the left in bold) to indicate the sensor

-LPW

-LPB

White Low Profile Flush Mounting Sheath w/ 6" Teflon Leads

Black Low Profile Flush Mounting Sheath w/ 6" Teflon Leads

Optional Lead Lengths 6" leads are standard

Temperature Sensors

Example Part Number: BA/10K-2-LPW White Low Profile "Button" Sensor, 10K-2 thermistor

Your Part Number:

*Note: 3.25K Thermistor and 10K-3[11K] Thermistor are only available with 6" leads.

Call BAPI if you have questions about the above ordering grid or the configuration of the product you are ordering.