VOC Room Sensor,
List Your
Price Order
Ordering Information VOC Room Sensor in the BAPI-Stat 3 Style Enclosure
BA/
Temperature Display Mode (Must select one)
BS3F
Temperatures Displayed in °F (Temperature is displayed by default but can be turned off by the user. See instruction sheet.)
$35.00
$_______
BS3C
$35.00
$_______
BS3X No LCD Display $0.00
VOC Output (Must select one)
-VOC05
VOCs Transmitted as 0 to 2,000 ppm CO2 Equivalent, 0 to 5 VDC output
$475.00
$_______
-VOC10
VOCs Transmitted as 0 to 2,000 ppm CO2 Equivalent, 0 to 10 VDC output
$475.00
$_______
Humidity Output (Skip if not required)
-H205 ±2% Humidity Transmitter, 0 to 5 VDC output
$80.00
$_______
-H210 ±2% Humidity Transmitter, 0 to 10 VDC output
$80.00
$_______
-H212
$80.00
$_______
Setpoint Display Options (Skip if not required)
Desired Range
Designator
Desired Range
Designator
P
60 to 80 °F or 15 to 27 °C
E
A
65 to 80 °F or 18 to 27 °C
F
-# -5 to +5
B
70 to 74 °F or 21 to 23 °C
L
C
45 to 96 °F or 7 to 36 °C
G
D
Setpoint Output Value Range (Skip if not required)
Desired Range
Designator
Desired Range
Designator
23
61 Any
25
0 to 20 kΩ
80 Setpoint
## 1800 to 2200 Ω
27
4.75 k to 24.75 kΩ
81 $6.00
$_______
40
83
41
10 k to 30 kΩ
84
42
0 to 100 kΩ
90
60
0 to 5 V*
00*
Additional Setpoint Ranges are available. See App. Notes Pg.2 for complete list.
SETPOINT LEGEND (insert Designator #)
Legend Range Designator Legend Range Designator
L0
COOL/WARM
L6
Additional Legends are available. Call BAPI for more information.
Sensor Type (Skip if resistive sensor in not required)
0
RTD's
-1375
1K Platinum RTD, 1,000Ω @ 0°C, 3.75Ω/°C temp coeff. $25.00
$_______
-1NI
1K Nickel RTD, 1,000Ω @ 21°C, 5Ω/°C temp coeff. or
-1
$35 for 1NI
$_______
-2
2K Silicon RTD, 2,000Ω @ 20°C, 8Ω/°C temp coeff.
-18
1.8K Thermistor, 1,800Ω @ 25°C Thermistors
-3
$18.00
$_______
-33
3.3K Thermistor, 3,300Ω @ 25°C
-102
10K-2 Thermistor, 10,000Ω @ 25°C
-103
10K-3 Thermistor, 10,000Ω @ 25°C
-10311
10K-3[11K] Thermistor, 5,238Ω @ 25°C, 11KΩ shunt resistor
-20
-50
50K Thermistor, 50,000Ω @ 25°C Semi-
-100
100K Thermistor, 100,000Ω @ 25°C conductor
-592
AD592 Semiconductor, 273
A @ 0°C
$25.00
$_______
Override Configuration (Must select one)
-J
Override as a Separate Output.*
$5.00
$_______
-N
Override in Parallel (//) with Sensor
$5.00
$_______
-P Override in Parallel (//) with Setpoint: NOT available on voltage setpoint models
$5.00
$_______
-Z No Override. (Needed if no override is required)
$0.00
Optional Communication Jack Mounted in unit's base
-C35L
$10.00
$_______
-C35LT 3.5 mm Phono Style Jack with Leads and Terminal Block
$10.00
$_______
Optional Test and Balance Switch (Skip if not required)
-TB
$7.50
$_______
Differential Ground – Setpoint & Temp Sensor (Skip if not required)
VOC Level Indication (Must select one)
-BNK
EXAMPLE
BA/
BS3F -VOC05 -H205 -A 80L6 -0 -J -C35L -TB -LED
Example Part Number: BA/BS3F-VOC05-H205-A80L6-0-J-C35L-TB-LED
Total =
$______
Differential Ground (Default is Common Ground, Only add -DF if
BAPI-Stat 3 Enclosure
D3
Rev. 10/23/14
Temperatures Displayed in °C (Temperature is displayed by default but can be turned off by the user. See instruction sheet.)
±2% Humidity Transmitter, 2 to 10 VDC output
-2 to +2
-3 to +3
50 to 90 °F or 10 to 32 °C
55 to 85 °F or 13 to 30 °C
674 to 274 Ω
800 to 1200 Ω
0 to 1000 Ω
500 to 1500 Ω
2 k to 3 kΩ
0 to 10 kΩ
15 k to 5 kΩ
7.87 k to 27.87 kΩ
Air Quality Sensors
No Legend
100 Platinum RTD, 100Ω @ 0°C, 0.385Ω/°C temp coeff.
1K Platinum RTD, 1,000Ω @ 0°C, 3.85Ω/°C temp coeff.
3K Thermistor, 3,000Ω @ 25°C
20K Thermistor, 20,000Ω @ 25°C
µ
(Dry contact only, not intended to switch a load.)
3.5 mm Phono Jack w/ Leads Attached
Three Position Switch
-DF
required)
Green/Orange/Red LED on Logo Plate to Indicate VOC
-LED
PPM Level. Includes Legend for Good, Fair and Poor.
Black Arrow on Display to Indicate VOC PPM Level.
-ARW
Includes Legend Below Display for Good, Fair and Poor
No LED or Arrow Indicators, No Legend
Your Part Number:
Call BAPI if you have questions about the above ordering/pricing grid or the configuration of the product you are ordering.
*Not available with Differential Ground (-DF) option
°F
°C Humidity Generic
A
-3 to +3
x x x x x x x x
B
-5 to +5
x x x x x x x x
C
50 to 90°F 10 to 32°C
x x x x x x x x
D
55 to 85°F 13 to 30°C
x x x x x x x x
E
60 to 80°F 15 to 27°C
x x x x x x x x
65 to 80°F 18 to 27°C
G
45 to 96°F 7 to 35°C
x x x x x x x
H
-20 to 120°F -29 to 49°C
x x x x
J
68 to 78°F 20 to 26°C
x x x x x x x x
K
65 to 95°F 18 to 35°C
x x x x x x x
L
70 to 74°F 21 to 23°C
x x x x x x x x
M
0 to 100%RH
x x x
N
35 to 70%RH
x x x
-2 to +2
X
40 to 80°F 4 to 27°C
x x x x x x x x
AA
60 to 85°F 15 to 30°C
x x x x x x x
BB
54 to 90°F 12 to 32°C
x x x x x x x
CC
41 to 85°F 5 to 30°C
x x x x x x x
DD
32 to 100°F 0 to 38°C
x x x x x x x
EE
67 to 77°F 19 to 25°C
x x x x x x x
FF
-10 to +10
x x x x x x x
0 to 100°F -18 to 38°C
JJ
40 to 90°F 4 to 32°C
x x x x x x x
KK
32 to 185°F 0 to 85°C
x x x x
MM
-40 to 140°F -40 to 60°C
x x x x
NN
69 to 75°F 21 to 24°C
x x x x x x x
PP -4 to +4 x x x x x x x
QQ
55 to 95°F 13 to 35°C
x x x x x x x
32 to 212°F 0 to 100°C
SS
25 to 50°F -4 to 10°C
x x x x
0 to 43°C
0 to 43°C
0 to 60°C
0 to 70°C
-99 to 999°C
-40 to 85°C
-40 to 60°C
-40 to 60°C
**Range describes the Output Module Range as well as the Display Range if used with the BAPI-Com.
Setpoint Display Ranges for BAPI Room Sensors
Resistance Output Values for BAPI-Stat 2 & 4 Units with Heat/Cool and Off/Auto Control
Designator RµP RµPS
F
P
GG
RR
An "x" in the box indicates that the output range is available for that room unit.
*Setpoint range must be within displayed temperature range
Setpoint Display Range**
Maximum Temperaure Display Range ->
x x x x x x x x
x x x x x x x x
32 to 110°F
32 to 110°F
"Quantum", Decora
& BAPI-Stat 4
32 to 99°F
BAPI Room Sensors With Display
X-Combo*
32 to 158°F
T1K
Room Trans
-147 to 999°F
"Quantum Prime" or BAPI-
x x x
x
Stat 3* Temp & Humidity
-40 to 185°F
"Quantum Prime" or
BAPI-Stat 3* VOC & CO2
-40 to 140°F
BAPI-Com**
Rev. 07/15/13
Setpoint Display & Mode Control Ranges
-40 to 140°F
Resistance Output Values for Units with Fan Speed Control
Designator Room Sensor Models
XLD 5k 10k 15k 20k 25k RuPM, BAPIStat 2 & 4
X01 4.89k 2.33k 10.63k 13.24k 16.33k RuPM, BAPIStat 2 & 4
X02 2k 4k 6k 8k 10k RuPM, BAPIStat 2 & 4
X03 5k 10k 15k RuPM, BAPIStat 2 & 4
X05 4.89k 2.33k 15.8k RuPM, BAPIStat 2 & 4
X06 6.5k 8.5k 10.5k 12k BAPIStat 2 & 4 Only
X07 5k 15k BAPIStat 2 & 4 Only
X08 12.686k 11.86k 13.86k RuPM, BAPIStat 2 & 4
Fan Speed Control Selection and Resistance Output Value
OFF AUTO LO MED HI ON
Resistance Output Values for Units with Heat/Off/Cool Mode and On/Auto Fan Control
Mode Control Selection and Resistance Output Value
HCF 5k 10k 15k 20k 25k 30k RuPM, BAPIStat 2 & 4
H01 0k 2k 4k 6k 8k 10k RuPM, BAPIStat 2 & 4
Designator Room Sensor Models
H02 5K 10K 15K 20K BAPIStat 2 & 4 Only
Heat/Auto Off/Auto Cool/Auto Heat/On Off/On Cool/On
Mode Control Selection and Resistance Output Value
Heat Cool Auto Off
Room Sensor ModelsDesignator
BAPI Application Notes
I3
"Quantum"
Setpoint & BAPI-
Stat 4M
00 0 to 5 V 5 Volts x x x x x x x Ch 1,2,3 x x x
01 1 to 5 V 4 Volts x x x x x x x
02 3.7 to 0.85 V 2.85 Volts x x x x x x x
03 5 to 0 V 5 Volts x x x x x x x Ch 3 x x x
04 4.2 to 1.2 V 3 Volts x x x x x x x
07 2.773 to 0.43 V 2.343 Volts x x x x x x x
10 0 to 10 V 10 Volts x x x x x x x x x
11 2 to 10 V 8 Volts x x x x x x
21 792 to 208 Ω 584 Ω x x x x x²
x x x x
23 674 to 274 Ω 400 Ω x x x x x x x x x x x x x²
24 597 to 305 Ω 292 Ω x x x x x²
25 800 to 1200 400 Ω x x x x x x x x x x x x x²
x x x x x x x x x x x x
27 1800 to 2200 400 Ω x x x x x x x x x x x x x²
28 865 to1286 400 Ω x x x x x x x x x x x x x²
29 700 to 300 400 Ω x x x x x x x x x x x x
41 500 to 1500 Ω 1 kΩ x x x x x x x x x x x x x
x x x x x x x x x x x x x
43 249 to 1249 Ω 1 kΩ x x x x x x x x x x x x x
44 10 to 11 kΩ 1 kΩ x x x x x x x x x x x x x
45 12.5K-11.5K Ω 1 kΩ x x x x x x x x x x x x x
x x x x x x x x x x x x x
47 182 to 1182 Ω 1 kΩ x x x x x x x x x x x x x
55 0 to 1.5 kΩ 2 k Ω x
61 15k to 5 kΩ 10 kΩ x x x x x x x x x x x x x x
62 9577 to 1422 Ω 8.16K x x x x x x
x x x x x x x x x x x x x x
64 200 to 10.2 kΩ 10 kΩ x x x x x x x x x x x x x x
65 10.4k to 400Ω 10 kΩ x x x x x x x x x x x x x x
66 10 kΩ to 0 10 kΩ x x x x x x x x x x x x x x
x x x x x x x x x x x x x x
68 9629 to 806 Ω 10 kΩ¹ x x x x x x x x x
[XL]** 10.6K to 600Ω 9.62 kΩ x x x x x x x x x
81 4.75 to 24.75 kΩ 20 kΩ x x x x x x x x x x x x x x
82 6.19 to 26.19 kΩ 20 kΩ x x x x x x x x x x x x x x
x x x x x x x x x x x x x x
84 10 to 30 kΩ 20 kΩ x x x x x x x x x x x x x x
85 24.75 to 4.75 kΩ 20 kΩ x x x x x x x x x x x x x x
***The X-Combo unit uses a unique set of designators for the ranges, not the designators listed on this page. See the X-Combo ordering grid for the designators.
²The resolution is 40Ω per step with 250 steps.
Units With Display
Units Without Display
Units With or Without Display
2kΩ
Setpoint Output Ranges for BAPI Room Sensors
Volts
Designator
Output Range Span
Delta
Style
"Quantum"
without
Display
BAPI-Stat 4
without
Display
RµP RµPS Decora
Pushbutton
BAPI Room Sensors
"Quantum"
Slider Setpoint
& BAPI-Stat 4S
X-
Combo***
T1K
Room
Trans
"Quantum Prime" and
BAPI-Stat 3* Temp or
Humidity Units
BAPI-Stat 4*
with Humidity
or Dew Point
"Quantum Prime"
and BAPI-Stat 3*
VOC or CO2 Units
BAPI-Com
I2
Setpoint Output Ranges
BAPI Application Notes
Current 16 4-20 mA 16 mA
<1kΩ
Span
1kΩ
Span
Span
5kΩ
Span
10kΩ
Span
20kΩ
Span
20 889 to 111 Ω 778 Ω x x x x
22 695 to 305 Ω 390 Ω
26 909 to 1309 400 Ω
40 0 to 1 kΩ 1 kΩ x x x x x x x x x x x x x
42 2 to 3 kΩ 1 kΩ
46 1K to 0 Ω 1 kΩ
48 0 to 2 kΩ 2 kΩ x x x
50 0 to 5 kΩ 5 kΩ x x x x x x
51 7.87k to 2.87kΩ 5 kΩ x x x x x x
52 10.0k to 15.0kΩ 5 kΩ x x x x x x
53 2.5k to 7.5kΩ 5 kΩ x x x x x x
54 1k to 6kΩ 5 kΩ x x x x x x
60 0 to 10 kΩ 10 kΩ x x x x x x x x x x x x x x
63 1 to 11 kΩ 10 kΩ
67 5k t o 15 kΩ 10 kΩ
80 0 to 20 kΩ 20 kΩ x x x x x x x x x x x x x x
83 7.87 to 27.87 kΩ 20 kΩ
Ch 1,2
x x
x²
x²
x²
x²
Rev. 11/27/18
100kΩ
50kΩ
*Setpoint range must be within displayed temperature range
**XL10 Option
¹Only available with pushbutton style setpoint sensors.
Note: RuP options 60, 61 and 62 are not available for large display spans. Contact your BAPI representative for additional information.
90 0 to 100 kΩ 100 kΩ x x x x x x x x x x x x
91 25K to 75 kΩ 50 kΩ x x x x
Loading...