Banner WLS27CWGRXX3 0570 DS24Q, WLS27XWGRXX3 0570 DS24Q, WLS27CWYRXX3 0570 DS24Q, WLS27XWYRXX3 0570 DS24Q, WLS27CGYRXX3 0570 DS24Q Instruction Manual

WLS27

ConnectorWindow

Lighted

Length (mm)

Colors 1-5 and ControlCascadableFamily

C = Cascadable
X = Non-cascadable

WGRXX3 = White, Green, and Red with override control
WYRXX3 = White, Yellow, and Red with override control
GYRXX3 = Green, Yellow, and Red with override control
WGRYB5 = White, Green, Red, Yellow, and Blue with binary control
WGRXX6 = White, Green, and Red with I/O Block control
WYRXX6 = White, Yellow, and Red with I/O Block control
GYRXX6 = Green, Yellow, and Red with I/O Block control

0285
0570
0850
1130

D = Diffused

Q = Integral 4-pin M12 QD
(mating cordset required)

X

WGRXX3 0285 D

Q

Construction

S

S = Sealed

Voltage

24

24 = 24V dc

1

4

3

2

2

3

4

1

EZ-STATUS WLS27 Mulcolor LED Strip Light

201896

Instrucon Manual

Banner's WLS27

Mulcolor LED Strip Light has a sturdy aluminum housing and is encased in a shaerproof, UV-stabilized, copolyester

shell, making it ideal for harsh indoor and outdoor applicaons.

• EZ-STATUS combines lighng and indicaon in one device to illuminate an area or machine, and show status change

• Models with 3 or 5 colors available, all with only 3 inputs

• Rugged, water-resistant IEC IP69K rang

• Four available lengths from 285 mm to 1130 mm

• Daisy chain power to mulple lights

Stand-Alone Light or End Light in a Cascade—QD First or Middle of a Cascade—QD

Available as stand-alone models, or as cascade models that can be daisy-chained together for a connuous length of lighng, with a
minimum of wiring.

Stand-alone models have a male quick disconnect (QD) at one end for power connecon and no connecons at the opposite end. A
stand-alone model may be used as the last model in the cascade series.

Cascade models have a male quick disconnect (QD) at one end for power

connecon, and a female QD at the opposite end for

connecng to other lights in the cascade. A double-ended accessory cordset must be used between each pair of lights in a cascade.

Models

Wiring Diagrams

Male

Original Document
201896 Rev. A

Female

8 November 2017

Key

Pin 1 Brown Input 1
Pin 2 White: Input 3
Pin 3 Blue: DC Common
Pin 4 Black: Input 2

EZ-STATUS WLS27 Mulcolor LED Strip Light

3 Color Override Control (Color 3 overrides Colors 1 and 2, Color 2 overrides Color 1)

Input 1: Pin 1

Brown Wire

— — — Light O

+24 V dc — — Color 1 On

— +24 V dc — Color 2 On

+24 V dc +24 V dc — Color 2 On

— — +24 V dc Color 3 On

+24 V dc — +24 V dc Color 3 On

— +24 V dc +24 V dc Color 3 On

+24 V dc +24 V dc +24 V dc Color 3 On

3 Color I/O Block Control (Input 1 is always on through the block)

Input 1: Pin 1 Brown Wire Input 2: Pin 4 Black Wire Input 3: Pin 2 White Wire LED Color

Input 2: Pin 4 Black

Wire

+24 V dc — — Light O
+24 V dc +24 V dc — Color 1 On
+24 V dc — +24 V dc Color 2 On
+24 V dc +24 V dc +24 V dc Color 3 On

Input 3: Pin 2

White Wire

LED Color

5 Color Binary Control (Binary input state controls color)
Input 1: Pin 1

Brown Wire

— — — Light O

+24 V dc — — Color 1 On

— +24 V dc — Color 2 On

— — +24 V dc Color 3 On
+24 V dc +24 V dc — Color 4 On
+24 V dc — +24 V dc Color 5 On

— +24 V dc +24 V dc Light O
+24 V dc +24 V dc +24 V dc Light O

Input 2: Pin 4

Black Wire

Input 3: Pin 2

White Wire

LED Color

2 www.bannerengineering.com - Tel: [phone] P/N 201896 Rev. A

D

16.8
[.66]

17.6
[.69]

27.0
[1.06]

17.6
[.69]

16.8
[.66]

M12 X 1

L1

L2

L3

27.0
[1.06]

16.8
[.66]

17.6
[.69]

16.8
[.66]

17.6
[.69]

M12 X 1

M12 X 1

L4

EZ-STATUS WLS27 Mulcolor LED Strip Light

Specicaons

Supply Voltage

24 V dc (+ 20% / - 10%)
Use only with suitable Class 2 power supply (UL) or a SELV power supply (CE)

Lighted Length Typical Current (A) at 25°

285 mm 0.315 0.400
570 mm 0.630 0.800
850 mm 0.945 1.200
1130 mm 1.260 1.600

1

C

Maximum Current (A)

Supply Protecon Circuitry

Protected against reverse polarity and transient voltages

Light

Characteriscs

Daylight White Ecacy: 85 lumens/wa typical at 24 V dc at 25 °C (77 °F)
CRI: 80, minimum

Color

Daylight
White

Green 525 nm 400 800 1200 1600
Red 625 nm 185 370 555 740
Yellow 580 nm 570 1140 1710 2280
Blue 470 nm 125 250 375 500

Dominant

Wavelength
(nm) or Color
Temperature

5000 K (±300 K) 650 1300 1950 2600

Lighted Length Lumens (Typical at 25 °C)

285 mm 570 mm 850 mm 1130 mm

Leakage Current Immunity

400 µA

LED Lifeme

Lumen Maintenance - L
When

operang within specicaons, output decreases less than 30% aer

50,000 hours

70

Mounng

Bracket LMBWLS27EC included (2 for lights up to 570 mm or 3 for lights 850
mm and longer)

Construcon

Clear anodized aluminum inner housing and FDA-grade copolyester outer
housing

Connecons

Integral 4-pin M12/Euro-style male quick disconnect (QD)

Environmental

Rang

Rated IEC IP66, IEC IP67, and IEC IP69K, per DIN 40050

Vibraon and Mechanical Shock

Vibraon 10 Hz to 55 Hz 1.0 mm p-p amplitude per IEC 60068-2-6

1

Shock 15G 11 ms duraon, half sine wave per IEC 60068-2-27

Operang Temperature

–40 °C to +50 °C (–40 °F to +122 °F)
Storage Temperature: –40 °C to +70 °C (–40 °F to +158 °F)

Cercaons

Applicaon Notes

When connecng cascadable lights in series it is important not to exceed
maximum current limitaons:

Maximum length of light at 24 V dc: 3.0 m (9.8 )

Do not spray cable with high-pressure sprayer, or cable damage will result.

Dimensions

Quick Disconnect Models

Cascade Models

Models L1 L2 L3 L4

WLS27..0285.. 286 mm (11.3 in) 330 (13 in) 349.5 mm (13.8 in) 358 mm (14.1 in)

1

Values shown at 25 °C - current and lumen values decrease 0.4% per 1 °C from ambient. For example, a 1130 mm unit will have a maximum current of 1.600 A at -40 °C and 1.134 A at +50 °C.

P/N 201896 Rev. A www.bannerengineering.com - Tel: [phone]