Bang and Olufsen Beolink active Owners manual

BEOLINK ACTIVE

1

With the BeoLink Active kit and a pair

of active Bang & Olufsen loudspeakers

your main Bang & Olufsen system gets

an extra dimension.

Now you can play any source you like

(audio or video) in your main system

and listen to it – via your BeoLink

installation – in the room with the

BeoLink Active and your extra speakers.

But this is not all. You can even control

the daily playback functions in your

main system via the BeoLink Active,

using the Beo4 remote control.

This guide explains how...

User’s guide

2

CONTENTS

3

4 Nice to know about...

..Music in other rooms

5 Close-up operation

Sound control

Timer Play control

Volume adjustment

6 Remote operation

Using the Beo4 remote control

7 Controlling your main system

8 Nice to know

9 Adjusting BeoLink Active sound

10 Using the Beolink 1000 remote

control

This guide describes how to operate your BeoLink
Active setup (BeoLink Active kit and a pair of
active Bang & Olufsen loudspeakers).

The separate Setting-up guide, which is also
enclosed with the BeoLink Active kit, describes in
detail how to install the BeoLink Active with your
Bang & Olufsen loudspeakers, and it describes
how to make the BeoLink Active ready for use.

NICE TO KNOW ABOUT...

4

..Music in other rooms

Your main Bang & Olufsen system (audio, video,
or AV) and your BeoLink Active setup must be
interconnected by a Bang & Olufsen BeoLink
installation.

You will then be able to listen to any source from
your main system (and even to control the source)
in the room with your BeoLink Active setup.

The BeoLink Active kit and your active
Bang & Olufsen loudspeakers give your
main Bang & Olufsen system an extra
dimension:

• You can listen to any source you like
from your main system (audio or
video) in your BeoLink Active room.

• You can control a number of
functions in your main system from
your BeoLink Active room – using the
Beo4 remote control.

BeoLink Active and the two speakers
will give you the full benefit of the
high-quality stereo sound produced by
your main system.

This guide explains how...

Operating BeoLink Active close-up, you can:

• Switch on to the radio (or TV) program that was
last playing in your main Bang & Olufsen
system, or listen-in on a source (audio/video)
that is currently playing.

• Adjust the volume level in the two loudspeakers
connected to the BeoLink Active.

• Include your BeoLink Active room in a Timer
Play programming of your main system.

Using the Beo4 remote control, you can:

• Switch on any source you like in your main
Bang & Olufsen system (audio/video) via the
BeoLink Active receiver.

• Operate all the daily playback functions for the
source that is currently playing.

• Adjust the sound in the two loudspeakers
connected to the BeoLink Active.