B and R Automation RFM-2-NF Users Guide
We reserve the right to change the content of this manual without prior notice. The information contained
herein is believed to be accurate as of the date of publication, however, B&R makes no warranty, expressed
or implied, with regards to the products or the documentation contained within this document. B&R shall not
be liable in the event if incidental or consequential damages in connection with or arising from the furnishing,
performance or use of these products. The software names, hardware names and trademarks used in this
document are registered by the respective companies.
Copyright © B&R – Subject to change without notice
Integration Guide RFM-2-NF_Version 1.0.docx
April 4, 2019
1/9
B&R wireless board "RFM-2-NF"
Integration Guide
Date:
April 4, 2019
Project number:
N/A
B&R wireless board "RFM-2-NF"
Integration Guide
Version information
Copyright © B&R - Subject to change without notice
Integration Guide RFM-2-NF_Version 1.0.docx
April 4, 2019
2/9
I Version information
Version
Date
Comment
Responsible
1.0
2019-04-02
First Edition
R. Sevcik.
Table 1: Versions
II Distribution
Name
Company, Department
Amount
Comment
Fr. Musat
CSA Group Bayern GmbH
1
N/A
Table 2: Distribution
III Organization of safety notices
Safety notices in this document are organized as follows:
Safety notice
Description
Danger!
Disregarding the safety regulations and guidelines can be life-threatening.
Warning!
Disregarding the safety regulations and guidelines can result in severe injury or heavy damage to property.
Caution!
Disregarding the safety regulations and guidelines can result in injury or damage to property.
Information
This information is important for preventing errors.
Table 3: Safety notices
B&R wireless board "RFM-2-NF"
Integration Guide
Table of Contents
Copyright © B&R - Subject to change without notice
Integration Guide RFM-2-NF_Version 1.0.docx
April 4, 2019
3/9
IV Table of Contents
1 Introduction ................................................................................................................. 4
2 Integration instructions .............................................................................................. 4
2.1 Mounting of the board, connecting to PC ............................................................................................. 4
2.2 List of applicable guidelines, standards, rules ...................................................................................... 5
2.3 Specific operational conditions ............................................................................................................. 5
2.4 Modifications ......................................................................................................................................... 5
2.5 RF-Exposure condition ......................................................................................................................... 5
2.6 Label and compliance information ........................................................................................................ 5
2.7 User manual information ....................................................................................................................... 6
2.8 Additional aspects ................................................................................................................................. 6
3 Figure Index ................................................................................................................ 7
4 Table Index .................................................................................................................. 8
5 Index ............................................................................................................................ 9
Loading...