B and M Merchandise SPSE User Manual
Pro SE
Pro SE Special Edition
Pro SEPro SE
Special Edition
Special EditionSpecial Edition
© 2015 Radenso®
User
User Manual
UserUser
Manual
ManualManual
Page 1
Radar Detector Radenso Pro SE
Foreword
Congratulation on your new investment. You chose one of the best high-tech, GPS enabled, mobile radar and
laser detector available on the market today. The Radenso Pro SE is MADE IN EUROPE and packaged into the
smallest radar detector in the world. The focus on the development of the Radenso Pro SE was simple; design
the most ergonomic and user-friendly radar detector for easy and unobtrusive installation, while having longrange warnings on all radar bands coupled with intelligent filters to eliminate annoying false alarms from nonradar threats. And our engineers delivered!
Radenso Pro SE features:
Most sensitive high performance windshield mounted radar detector in the world.
Longest detection range.
Selectable X, K and Ka narrow radar band tuned to the exact radar frequencies used in North America for
increased range and reduced false alarms.
Selectable Ka POP radar band (ON/OFF).
Selectable 2-level Traffic Sensor Rejection Filter (TSR Low and TSR High).
Highway, City and AutoCity Mode.
Revolutionary AutoCity Mode with selectable Band filtering based on speed settings.
Bright, Dim, Dark Display modes.
Smart Dark Display Mode (turns on display only for alerts).
Bright Alphanumeric LED display.
AutoMute reduces volume of alerts after 2 seconds.
Preloaded GPS Speed and Red Light Camera database.
Unlimited free lifetime updates for database and firmware – no obsolescence ever.
7 selectable display modes (Speed/Time, Speed/Voltage, Battery Voltage, Time, Speed, Speed/Compass).
Displays radar frequency during visual alert.
Voice Alerts.
Frequency announcement during alert.
SpeedMeter Option (turns off radar circuitry completely and converts Radenso Pro SE into a
digital Speedometer for states where radar detectors are prohibited).
Mark your own POI locations for future alerts.
Lockout false alert areas.
User-friendly, easy intuitive voice-guided feature section.
Large suction cups for firm, secure installation on windshield.
Power Cord with Power ON/OFF button.
Optional Direct Wire power cord available.
2 year manufacturer warranty.
Quick Start up Guide
To start using your Radenso Pro SE radar detector follow these easy steps:
1. Slide the windshield mounting bracket into the QuickMount slot at the front of the radar detector.
2.
Plug the small end of the power cable into the power jack on the Radenso Pro SE on the left side and connect the
large plug with the 12V power socket in your car.
3. Press the red button at the large end of the power cable (at the 12 V socket) to turn the power cable on.
The button will light up and indicate if Power is on.
4. Press the Power button (left button on top of unit) for 2 seconds to turn on Radenso Pro SE.
Unit will power up with the start-up sequence. After a few seconds, the Radenso Pro SE will notify you
with a voice message that the satellite is connected.
5. Adjust the volume level by pressing the volume buttons "+" or "-" located on the right side of the unit.
Change Default settings:
Radenso Pro SE is now ready to go. If you want to change any of the default settings of your unit please
refer to the next pages.
Main functions of Radenso Pro SE
The Radenso Pro SE is one of the most powerful radar detectors in the industry. It's designed to protect the
driver from speeding tickets/fines. The Radenso Pro SE communicates with the driver in English and its main
functions are the detection of microwave radars (X / K / Ka narrow bands), laser guns, red light cameras and
fixed-speed cameras (GPS database).
Notifications:
When a radar signal is detected, the driver will be alerted by a visual text warning and a voice/tone alert. The
display and voice alert will indicate the detected radar band, frequency and signal strength. A beeping warning
tone will increase its intensity with increasing signal strength. The signal strength has ten levels. GPS alerts are
reported by voice; for example "Speed Camera".
Page 2
Page 3
Function of Control Buttons
Power / Menu Button
Short press: You will enter into setup
menu. During an alert pressing the
button mutes the volume. The next
alarm will be reported again with the
Default vol.
Long press: Turn unit ON / OFF
Volume Buttons [+ - ]
Short press: Changing volume of
the Radenso Pro SE or change
program options in the Menu
Mode
Power Jack
Plug power cord into this port
Alphanumeric Display
Radenso Pro SE will show
selected display mode, visual
alerts and text messages
Radar Horn Antenna and Laser
Lens
Needs unobstructed view of
the road ahead. Do not mount
behind metal coated
windshields or wipers
Release Button
Press this button and slide the
windshield mount until it is locked.
Press button to unlock the mount for
removal
Mode/Sensitivity/Mark Button
Short press: Scroll between
Highway/City/AutoCity modes.
Long Press: Add your own POI GPS
point for future alarms
Display/Alert Lockout Button
Short press: Select display brightness
(Bright, dim, smart dark, full dark)
Long press: Lockout alert location
USB Port
Connect USB data cable to update
database and/or firmware from our
website
Windshield Mount Slot
Insert the windshield mount into this
slot until you hear the "click"
Loading...