BLS-7361
BLUETOOTH BATHROOM SCALE
BLS-7361
Instruction Manual
© Sakar International, Inc. All rights reserved.
1
Introduction
The Bally Total Fitness BLS-7361 Bluetooth Bathroom Scale features the latest in digital sensor technology, providing
precise weight measurements year after year. The Bluetooth function sends your weight measurements to your
mobile device, and the app helps you track your weight and monitor progress. The extra durable, tempered safety
glass is built to withstand weight up to 400 lb. Please read this manual first before using this device in order to get
best results.
Intended Use
The Bally Total Fitness BLS-7361 Bluetooth Bathroom Scale is a home fitness product only and it is not intended to
serve as a substitute for the advice of a physician or medical professional. Do not use this device for diagnosis or
treatment of any health problem or disease. This is not a medical device.
2
Package Contents
1. Bally Total Fitness BLS-7361 Bluetooth Bathroom Scale
2. User’s Manual With Warranty Information
Features and Specifications
• Bluetooth Scale Sends Readings To Your Mobile Device
• App Records Weight And Monitors Progress
• Equipped With High Precision Sensors
• Tempered Safety Plate Glass Platform
• Stores Data For Unlimited Users
• Weight Capacity: 400 lb / 180 kg
• Choice of Weighing Modes : Pound (lb), Kilogram (Kg)
• Graduation: 100g / 0.2lb / ¼ lb
• Automatic Zero Resetting
• Automatic Switch Off
• Overload Indicator
• Power Supply : 1 x CR2032 lithium battery
NOTE: Please remove the insulation tab from the battery contacts before using.
3
Using Your Scale
1. Select the weighing mode (Lb/kg) by pressing the button located on the back of the scale.
2. Place the scale on a firm, flat and even surface to ensure accuracy.
3. Step on the scale, positioning your feet evenly on the platform.
4. Once your weight is displayed on the display screen, the scale will automatically turn off after 6 seconds.
Overload indicator
When “OL” is displayed on the LCD screen it indicates that the maximum weight has been exceeded.
Low battery indicator
When “LO” is displayed on the LCD screen you should install a new batteries.
Replacing Batteries
1. Open up the battery compartment located underneath your scale.
2. Insert 1 CR2032 battery, making sure to place it with the correct polarity (+,-) as indicated on the battery
compartment.
4
Battery Safety Advice
Always –
1. Use CR2032 lithium batteries only.
2. Make sure that the battery compartment is secure.
3. Insert battery correctly, with the + (positive) and - (negative) polarities matching the polarities indicated in the
battery compartment.
4. Store unused batteries in their packaging and away from metal objects that could cause a short circuit.
5. Remove a dead battery from the scale immediately.
6. Remove the battery from the scale if it will not be used for a prolonged period of time.
7. Keep loose batteries away from young children.
8. Seek medical advice if you believe a battery has been swallowed.
9. Never dispose of batteries in a fire.
Advice for Use and Care
1. Place your scale on a flat, hard surface. Carpeted or uneven floors may affect measurement accuracy.
2. The surface of the scale will be slippery if wet. Keep it dry.
3. Clean after use with a lightly damp cloth, do not use solvents or immerse the scale in water.
4. Avoid overloading the scale, as doing so can cause permanent damage.
5. Do not store the scale in an upright position when not in use as this will drain the battery.
6. Avoid excessive impact or vibration to the unit.
Loading...