Balluff BFIDU03 User Manual

BF-IDU03

RFID-Reader

Company Addresses

Europe, Germany, Headquarter
Balluff GmbH
Schurwaldstraße 9
D-73765 Neuhausen, Germany

Argentina
Balluff Argentina S.R.L.
Echeverría 1050, 1st UF 2
1604 Buenos Aires - Florida Oeste

Australia
Balluff Pty Ltd.
18 Malvern Street
Bayswater, 3153 Victoria

Brasil
Balluff Controles Elétricos Ltda.
Rua Francisco Foga, 25 ,Distrito Industrial
CEP 13280.000 – Vinhedo – SP

Canada
Balluff Canada Inc.
2840 Argentia Road, Unit 2 Mississauga,
Ontario L5N 8G4

China
Balluff (Shanghai) Trading Co. Ltd.
No.800 Chengshan Rd, 8F, Building A, Yunding International Commercial Plaza
200125, Pudong, Shanghai

Japan
Balluff Co., Ltd.
Aqua Hakusan Bldg. 9F 1-13-7 Hakusan, Bunkyo-ku,
Tokyo 113-0001

Mexico
Balluff de México S.A. de C.V.
Anillo Vial II Fray Junipero Serra No. 4416; Colonia La Vista Residencial
CP 76232 Delegación Epigmenio González, Querétaro

USA
Balluff Inc.
8125 Holton Drive, Florence
Kentucky 41042-0937

BF-IDU03

RFID-Reader

Operating Guide

Purpose of the Device

The BF-IDU03 device is intended to read and write "EPC Global Class 1 Gen2" compliant data
carriers (so called tags) via country dependent UHF radio frequencies.

Check that you have the right device variant
This UHF system consists of a radio frequency unit and an integrated antenna according to

specifications and may only be operated within the specified countries subject to all applicable
national legal regulations and standards.
Check that the type label contains the correct type approval symbol for your country.

► When using the UHF system in the European Community, the provisions in ETSI standard 302 208
apply.

► When using the UHF system in the USA, the directives of the FCC, Part 15 B and 15 C, apply.
► When using the UHF system in Canada, the directives of the IC, RSS-210 apply.
► When using the UHF system in Mexico, the directives of the SCT, NOM-121-SCT1-2009 apply.
► When using the UHF system in Argentina, the directives of Resolución SC 729/80 and SC 784/87

apply.

► When using the UHF system in Brazil, the directives of the ANATEL, 506/2008 and 442/2006 apply.
► When using the UHF system in China, the directives of the RFID National Standard and GB 9254

apply.

► When using the UHF system in Japan, the directives of "Radio Law" and ARIB T106 apply.
► When using the UHF system in Australia, the directives of the Radiocommunications Class License

2000 (Item 32A) apply.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.