For Assembly Purposes:
-Requires 2 people.
-Be careful of the legs.
-Requires a screwdriver.
PRODUCT NAME: Bouclier Desk
ITEM NUMBER: MO331
DIMENSIONS OF ITEM ASSEMBLED:
30”H X 56”W X 26”D
Check to ensure that you have the following:
A 8
Hardware Included
.ytQ .rtL
Screws
800.367.2810
www.ballarddesigns.com
B
.ytQ .rtL
4
Part List
Legs
This item is not intended for commercial use.
Made in Italy.
Page 1 of 2
2010 Ballard Designs, Inc.
STEP 1: Leg Installation
legs into the grooves in the corners of the desk. Be sure the dowel on the top of each leg
Remove the drawers and flip desk on its top. Install all 4 Legs (B) by sliding the
locks into the hole in the desk.
(B)
STEP 2: Leg Installation Part 2
Attach each Leg (B) using two Screws (A) in the pre drilled holes on the inside
(B)
edge of the desk.
(A)
DO NOT use alcohol based products or spray polisher as they can damage the finish.
Dust with soft cloth. One to two times monthly apply beeswax polish as needed.
Finish can be affected by heat or extended contact with oils or wine.
800.367.2810
www.ballarddesigns.com
Cleaning & Care:
Page 2 of 2
2010 Ballard Designs, Inc.
Loading...