Baldwin Boulder Multipoint User Manual
MULTI-POINT
INSTALLATION INSTRUCTIONS
Entrance American Cylinder Function Exploded View
SPRINGFIELD TRIM SHOWN
SEE HARDWARE
CATALOG FOR HOLE SPACING
INTERIOR TRIM
LOCK BODY
SPINDLE
POSITION NOTCHES
TOWARDS DOOR
EXTERIOR
THREADED
SCREW POSTS
SEE NOTE
PRESS-IN
BUSHINGS
INTERIOR #8
MACHINE SCREWS
DRILL THROUGH 5/16”
SEE NOTE
BRACKET
RECOMMENDED CYLINDER
ORIENTATION
CYLINDER PIN
HOUSING FACING
UP. SEE NOTE
SCREWS
CYLINDER
BRACKET
LOCK
CYLINDER
EXTERIOR TRIM
LEVER SET SCREWS
ALIGN WITH
SPINDLE GROOVE
Lock Cylinder Note: Shown is the lever on the top of the lock cylinder. The lever may be on
the bottom, depending on the lock.
#8 Machine Screws Note: Proper trim alignment requires installing the spindle and levers
before completely securing the #8 screws.
Threaded Screw Posts Note: Length may need to be cut down to accomodate different
door manufacturers’ hole pattern.
©2007 BALDWIN HARDWARE CORPORATION, READING, PA
PK 5903 (10/07)
MULTI-POINT
INSTALLATION INSTRUCTIONS
Patio American Cylinder Function Exploded View
SPRINGFIELD TRIM SHOWN
SEE HARDWARE
CATALOG FOR HOLE SPACING
INTERIOR TRIM
LOCK BODY
SPINDLE
POSITION NOTCHES
TOWARDS DOOR
EXTERIOR
TURN KNOB
SEE NOTE
THREADED
SCREW POSTS
SEE NOTE
PRESS-IN
BUSHINGS
INTERIOR #8
MACHINE SCREWS
DRILL THROUGH 5/16”
SEE NOTE
EXTERIOR TRIM
LEVER SET SCREWS
ALIGN WITH
SPINDLE GROOVE
Turn Knob Note: Shown is the lever on the top of the turn knob. The lever may be on the
bottom, depending on the lock.
#8 Machine Screws Note: Proper trim alignment requires installing the spindle and levers
before completely securing the #8 screws.
Threaded Screw Posts Note: Length may need to be cut down to accomodate different
door manufacturers’ hole pattern.
©2007 BALDWIN HARDWARE CORPORATION, READING, PA
PK 5903 (10/07)
Loading...