Page 1
MULTI-POINT
INSTALLATION INSTRUCTIONS
Patio Profile Cylinder Function Exploded View
SPRINGFIELD TRIM SHOWN
SEE HARDWARE
CATALOG FOR HOLE SPACING
EXTERIOR TRIM
1/4” LEVER
SET SCREW
ALIGN WITH
SPINDLE GROOVE
POSITION NOTCHES
LOCK
CYLINDER
SCREW
SPINDLE
TOWARDS DOOR
EXTERIOR
THREADED
SCREW
POSTS
SEE NOTE
LOCK BODY
INTERIOR TRIM
INTERIOR #8
MACHINE SCREWS
DRILL THRU 5/16”
SEE NOTE
PRESS-IN
BUSHINGS
LOCK
CYLINDER
#6 TURN KNOB
SET SCREW
#8 Machine Screws Note: Proper trim alignment requires installing the spindle and levers
before completely securing the #8 screws.
Threaded Screw Posts Note: Length may need to be cut down to accomodate different
door manufacturers’ hole pattern.
©2007 BALDWIN HARDWARE CORPORATION, READING, PA
PK 5901 (10/07)
Page 2
MULTI-POINT
INSTALLATION INSTRUCTIONS
Entrance Profile Cylinder Function Exploded View
SPRINGFIELD TRIM SHOWN
SEE HARDWARE
CATALOG FOR HOLE SPACING
EXTERIOR TRIM
SPINDLE
1/4” LEVER
SET SCREW
ALIGN WITH
SPINDLE GROOVE
POSITION NOTCHES
TOWARDS DOOR
EXTERIOR
LOCK BODY
THREADED
SCREW
POSTS
SEE NOTE
INTERIOR #8
MACHINE SCREWS
DRILL THRU 5/16”
SEE NOTE
PRESS-IN
BUSHINGS
LOCK
CYLINDER
SCREW
LOCK
CYLINDER
INTERIOR TRIM
#6 TURN KNOB
SET SCREW
#8 Machine Screws Note: Proper trim alignment requires installing the spindle and levers
before completely securing the #8 screws.
Threaded Screw Posts Note: Length may need to be cut down to accomodate different
door manufacturers’ hole pattern.
©2007 BALDWIN HARDWARE CORPORATION, READING, PA
PK 5901 (10/07)
Loading...