Baldor ZDM3581T-5 Product Information Sheet
Product Information Packet
ZDM3581T-5
1HP,1760RPM,3PH,60HZ,143TC,0519M,TEBC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: ZDM3581T-5 - 1HP,1760RPM,3PH,60HZ,143TC,0519M,TEBC,F1
Part Detail
Revision: K Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 05WGX127 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 05E535 Layout: 05LYE535 Poles: 04 Created Date: 08-24-2010
Base: RG Eff. Date: 06-26-2019 Leads: 3#18
Specs
Catalog Number: ZDM3581T-5
Enclosure: TEBC
Frame: 143TC
Frame Material: Iron
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 575.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: BLOWER
Current @ Voltage: 1.200 A @ 575.0 V
KVA Code: L
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0518M
Mounting Arrangement: F1
Power Factor: 71
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Design Code: B
Shaft Rotation: Reversible
Page 2 of 10
Product Information Packet: ZDM3581T-5 - 1HP,1760RPM,3PH,60HZ,143TC,0519M,TEBC,F1
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: ENCODER
Front Face Code: Encoder/Feedback Device
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: H
Inverter Code: Inverter Duty
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 10
Loading...