Baldor YPC344A Product Information Sheet

Product Information Packet

YPC344A

.5HP,1625RPM,1PH,60HZ,48YZ,3414C,TEAO,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: YPC344A - .5HP,1625RPM,1PH,60HZ,48YZ,3414C,TEAO,F1

Part Detail

Revision: F Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGR236 CD Diagram: CD0798 Mfg Plant:
Mech. Spec: 34M195 Layout: 34LYM195 Poles: 04 Created Date: 10-21-2014
Base: YP Eff. Date: 11-12-2018 Leads: 5#18

Specs

Catalog Number: YPC344A
Enclosure: TEAO
Frame: 48YZ
Frame Material: Steel
Output @ Frequency: .500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Yoke Pedestal
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 5.100 A @ 115.0 V

KVA Code: D
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 5 @ 18 AWG
Motor Lead Exit: Terminal Panel Or Lead Hole
Motor Lead Termination: None
Motor Type: 3414C
Mounting Arrangement: F1
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible: Connected Standard

Design Code: -

Shaft Slinger Indicator: Shaft Slinger

Page 2 of 10

Product Information Packet: YPC344A - .5HP,1625RPM,1PH,60HZ,48YZ,3414C,TEAO,F1

Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Terminal Panel
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter

Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: WG
Winding Thermal 2: None

Page 3 of 10