Baldor YPC245A Product Information Sheet

Product Information Packet

YPC245A

.33HP,1625RPM,1PH,60HZ,56YZ,3411C,TEAO,F

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: YPC245A - .33HP,1625RPM,1PH,60HZ,56YZ,3411C,TEAO,F

Part Detail

Revision: F Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGR235 CD Diagram: CD0798 Mfg Plant:
Mech. Spec: 34M197 Layout: 34LYM197 Poles: 04 Created Date: 07-01-2015
Base: YP Eff. Date: 11-12-2018 Leads: 5#18

Specs

Catalog Number: YPC245A
Enclosure: TEAO
Frame: 56YZ
Frame Material: Steel
Output @ Frequency: .330 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Yoke Pedestal
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 3.400 A @ 115.0 V

KVA Code: B
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 5 @ 18 AWG
Motor Lead Exit: Terminal Panel Or Lead Hole
Motor Lead Termination: None
Motor Type: 3411C
Mounting Arrangement: F1
Power Factor: 96
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Flat Only (When Non-STD)
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding

Design Code: -

Shaft Rotation: Reversible: Connected Standard

Page 2 of 10

Product Information Packet: YPC245A - .33HP,1625RPM,1PH,60HZ,56YZ,3411C,TEAO,F

Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Terminal Panel
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter

Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: WG
Winding Thermal 2: None

Page 3 of 10