Baldor VUHM3615T Product Information Sheet
Product Information Packet
VUHM3615T
5HP,1745RPM,3PH,60HZ,184TC,3634M,TEFC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: VUHM3615T - 5HP,1745RPM,3PH,60HZ,184TC,3634M,TEFC,F1
Part Detail
Revision: G Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGS543 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 36A003 Layout: 36LYA003 Poles: 04 Created Date: 06-30-2011
Base: N Eff. Date: 03-08-2016 Leads: 9#16
Specs
Catalog Number: VUHM3615T
Enclosure: TEFC
Frame: 184TC
Frame Material: Steel
Output @ Frequency: 5.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 208.0 V @ 60 HZ
460.0 V @ 60 HZ
230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CE
CSA
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: J
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3634M
Mounting Arrangement: F1
Power Factor: 78
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Bearing Grease Type: Polyrex EM (-20F +300F)
Shaft Extension Location: Pulley End
Page 2 of 10
Product Information Packet: VUHM3615T - 5HP,1745RPM,3PH,60HZ,184TC,3634M,TEFC,F1
Blower: None
Current @ Voltage: 6.800 A @ 460.0 V
14.200 A @ 208.0 V
13.600 A @ 230.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 10
Loading...