Baldor VUHM3542-5 Product Information Sheet

Product Information Packet

VUHM3542-5

.75HP,1725RPM,3PH,60HZ,56C,3516M,TEFC,F3

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VUHM3542-5 - .75HP,1725RPM,3PH,60HZ,56C,3516M,TEFC,F3

Part Detail

Revision: N Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGT499 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 35X042 Layout: 35LYX042 Poles: 04 Created Date: 05-22-2008
Base: N Eff. Date: 03-02-2018 Leads: 3#18

Specs

Catalog Number: VUHM3542-5
Enclosure: TEFC
Frame: 56C
Frame Material: Steel
Output @ Frequency: .750 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 575.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

WEEE
CSA

CE
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)

Inverter Code: Not Inverter
KVA Code: H
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3516M
Mounting Arrangement: F3
Power Factor: 78
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End

Blower: None

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: VUHM3542-5 - .75HP,1725RPM,3PH,60HZ,56C,3516M,TEFC,F3

Current @ Voltage: .900 A @ 575.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10