Baldor VUHL3519 Product Information Sheet
Product Information Packet
VUHL3519
1HP,1725RPM,1PH,60HZ,56C,3524L,TEFC,F3,N
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: VUHL3519 - 1HP,1725RPM,1PH,60HZ,56C,3524L,TEFC,F3,N
Part Detail
Revision: S Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGX945 CD Diagram: CD0001 Mfg Plant:
Mech. Spec: 35X062 Layout: 35LYX062 Poles: 04 Created Date: 12-05-2007
Base: N Eff. Date: 03-09-2020 Leads: 6#18
Specs
Catalog Number: VUHL3519
Enclosure: TEFC
Frame: 56C
Frame Material: Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 208.0 V @ 60 HZ
115.0 V @ 60 HZ
230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
WEEE
CSA
CE
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 6 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3524L
Mounting Arrangement: F3
Power Factor: 73
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Base Indicator: No Mounting
Rodent Screen: None
Page 2 of 10
Product Information Packet: VUHL3519 - 1HP,1725RPM,1PH,60HZ,56C,3524L,TEFC,F3,N
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 6.400 A @ 230.0 V
7.000 A @ 208.0 V
12.800 A @ 115.0 V
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 10
Loading...