Baldor VM3537-50 Product Information Sheet
Product Information Packet
VM3537-50
.5HP,2850RPM,3PH,50HZ,56C,3413M,TEFC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: VM3537-50 - .5HP,2850RPM,3PH,50HZ,56C,3413M,TEFC,F1
Part Detail
Revision: T Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGW631 CD Diagram: CD0044 Mfg Plant:
Mech. Spec: 34A063 Layout: 34LYA063 Poles: 02 Created Date:
Base: N Eff. Date: 03-19-2012 Leads: 12#18
Specs
Catalog Number: VM3537-50
Enclosure: TEFC
Frame: 56C
Output @ Frequency: .500 HP @ 50 HZ
Synchronous Speed @ Frequency: 3000 RPM @ 50 HZ
Voltage @ Frequency: 440.0 V @ 50 HZ
380.0 V @ 50 HZ
220.0 V @ 50 HZ
XP Division: Not Applicable
Agency Approvals: UR
CSA
CE
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: L
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 12 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3413M
Mounting Arrangement: F1
Power Factor: 70
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Current @ Voltage: 1.000 A @ 440.0 V
Shaft Extension Location: Pulley End
Page 2 of 9
Product Information Packet: VM3537-50 - .5HP,2850RPM,3PH,50HZ,56C,3413M,TEFC,F1
1.200 A @ 380.0 V
2.000 A @ 220.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 9
Loading...