Baldor VM3116 Product Information Sheet

Product Information Packet

VM3116

1HP,1725RPM,3PH,60HZ,56C,3424M,OPEN,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VM3116 - 1HP,1725RPM,3PH,60HZ,56C,3424M,OPEN,F1

Part Detail

Revision: L Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGW990 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 34-274 Layout: 34LY0274 Poles: 04 Created Date:
Base: N Eff. Date: 01-21-2015 Leads: 9#18

Specs

Catalog Number: VM3116
Enclosure: OPEN
Frame: 56C
Frame Material: Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

208.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)

Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3424M
Mounting Arrangement: F1
Power Factor: 70
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None

Blower: None

RoHS Status: ROHS COMPLIANT

Page 2 of 10

Product Information Packet: VM3116 - 1HP,1725RPM,3PH,60HZ,56C,3424M,OPEN,F1

Current @ Voltage: 3.400 A @ 230.0 V

3.700 A @ 208.0 V

1.700 A @ 460.0 V
Design Code: B
Drip Cover: Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Drip Cover Mounting
Front Shaft Indicator: None

Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor

Page 3 of 10