Baldor VM2534T Product Information Sheet

Product Information Packet

VM2534T

30HP,3510RPM,3PH,60HZ,284TSC,3938M,OPEN

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VM2534T - 30HP,3510RPM,3PH,60HZ,284TSC,3938M,OPEN

Part Detail

Revision: M Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 39WGW974 CD Diagram: CD0180 Mfg Plant:
Mech. Spec: 39P022 Layout: 39LYP022 Poles: 02 Created Date:
Base: N Eff. Date: 03-08-2016 Leads: 9#10

Specs

Catalog Number: VM2534T
Enclosure: ODP
Frame: 284TSC
Frame Material: Steel
Output @ Frequency: 30.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: N
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 34.000 A @ 460.0 V

Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 10 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3938M
Mounting Arrangement: F1
Power Factor: 90
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None

68.000 A @ 230.0 V

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: VM2534T - 30HP,3510RPM,3PH,60HZ,284TSC,3938M,OPEN

74.000 A @ 208.0 V
Design Code: B
Drip Cover: Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Drip Cover Mounting
Front Shaft Indicator: None

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor

Page 3 of 10