Baldor VM2515T Product Information Sheet
Product Information Packet
VM2515T
20HP,1760RPM,3PH,60HZ,256TC,3766M,ODTF,F
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: VM2515T - 20HP,1760RPM,3PH,60HZ,256TC,3766M,ODTF,F
Part Detail
Revision: P Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGT868 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 37J641 Layout: 37LYJ641 Poles: 04 Created Date: 07-26-2006
Base: N Eff. Date: 03-08-2016 Leads: 9#12
Specs
Catalog Number: VM2515T
Enclosure: ODP
Frame: 256TC
Frame Material: Steel
Output @ Frequency: 20.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
460.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: N
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 24.000 A @ 460.0 V
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 12 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3766M
Mounting Arrangement: F1
Power Factor: 84
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
48.000 A @ 230.0 V
Shaft Ground Indicator: No Shaft Grounding
Page 2 of 10
Product Information Packet: VM2515T - 20HP,1760RPM,3PH,60HZ,256TC,3766M,ODTF,F
50.000 A @ 208.0 V
Design Code: A
Drip Cover: Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Drip Cover Mounting
Front Shaft Indicator: None
Heater Indicator: No Heater
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 10
Loading...