Baldor VL725A Product Information Sheet

Product Information Packet

VL725A

2HP,3450RPM,1PH,60HZ,56C,1928L,OPEN,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VL725A - 2HP,3450RPM,1PH,60HZ,56C,1928L,OPEN,F1

Part Detail

Revision: Y Status: NLA/A Change #: Proprietary: No
Type: AC Elec. Spec: 19WGW043 CD Diagram: CD0052 Mfg Plant:
Mech. Spec: 19B105 Layout: 19LYB105 Poles: 02 Created Date: 06-26-2007
Base: N Eff. Date: 03-12-2015 Leads: 4#14 A&J,2#18 B PH,1#10 #1TH

Specs

Catalog Number: VL725A
Frame: 56C
Frame Material: Steel
Output @ Frequency: 2.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

230.0 V @ 60 HZ

Agency Approvals: CE

CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 13.000 A @ 230.0 V

26.000 A @ 115.0 V

KVA Code: G
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 4 @ 14 AWG, A&J
Motor Lead Exit: Terminal Panel
Motor Lead Termination: None
Motor Type: 1928L
Mounting Arrangement: F1
Power Factor: 69
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding

Design Code: L

Shaft Rotation: Reversible

Page 2 of 10

Product Information Packet: VL725A - 2HP,3450RPM,1PH,60HZ,56C,1928L,OPEN,F1

Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Terminal Panel
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter

Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB
Winding Thermal 2: None

Page 3 of 10