Baldor VHM3314T Product Information Sheet

Product Information Packet

VHM3314T

15HP,3450RPM,3PH,60HZ,215HP,0740M,ODP,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VHM3314T - 15HP,3450RPM,3PH,60HZ,215HP,0740M,ODP,F1

Part Detail

Revision: K Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 07WGX810 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 07K218 Layout: 07LYK218 Poles: 02 Created Date:
Base: N Eff. Date: 03-08-2016 Leads: 9#14

Specs

Catalog Number: VHM3314T
Enclosure: ODP
Frame: 215HP
Frame Material: Iron
Output @ Frequency: 15.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ

208.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: N
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Insulation Class: F
Inverter Code: Not Inverter
KVA Code: H
Lifting Lugs: Vertical Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0740M
Mounting Arrangement: F1
Power Factor: 90
Product Family: Weather Proof
Pulley End Bearing Type: Ball
Pulley Face Code: P-Base
Pulley Shaft Indicator: P-Base Groove & Key
Rodent Screen: None
Shaft Extension Location: Pulley End

Current @ Voltage: 16.800 A @ 460.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: VHM3314T - 15HP,3450RPM,3PH,60HZ,215HP,0740M,ODP,F1

33.600 A @ 230.0 V

37.000 A @ 208.0 V
Design Code: B
Drip Cover: Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10