Baldor VHM2514T Product Information Sheet

Product Information Packet

VHM2514T

20HP,3510RPM,3PH,60HZ,254HP,0928M,OPEN

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VHM2514T - 20HP,3510RPM,3PH,60HZ,254HP,0928M,OPEN

Part Detail

Revision: H Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 09WGY943 CD Diagram: CD0180 Mfg Plant:
Mech. Spec: 09G625 Layout: 09LYG625 Poles: 02 Created Date:
Base: N Eff. Date: 03-08-2016 Leads: 9#12

Specs

Catalog Number: VHM2514T
Enclosure: OPEN
Frame: 254HP
Frame Material: Iron
Output @ Frequency: 20.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: Vertical Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 12 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0928M
Mounting Arrangement: F1
Power Factor: 88
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: P-Base
Pulley Shaft Indicator: P-Base Groove & Key
Rodent Screen: None

Current @ Voltage: 23.500 A @ 460.0 V

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: VHM2514T - 20HP,3510RPM,3PH,60HZ,254HP,0928M,OPEN

47.000 A @ 230.0 V

51.000 A @ 208.0 V
Design Code: B
Drip Cover: Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Drip Cover Mounting
Front Shaft Indicator: None

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor

Page 3 of 10