Baldor VFSWDL3509 Product Information Sheet

Product Information Packet

VFSWDL3509

1HP,3450RPM,1PH,60HZ,56C,3524L,TEFC,F1,N

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VFSWDL3509 - 1HP,3450RPM,1PH,60HZ,56C,3524L,TEFC,F1,N

Part Detail

Revision: D Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGL350 CD Diagram: CD0648 Mfg Plant:
Mech. Spec: 35E4628 Layout: 35LYE4628 Poles: 02 Created Date: 06-28-2017
Base: N Eff. Date: 06-25-2018 Leads: 9#18 15" lead length,0#0 dbl dip & bake,0#0 phase insulaY

Specs

Catalog Number: VFSWDL3509
Enclosure: TEFC
Frame: 56C
Frame Material: Stainless Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Finish: UNPAINTED
Motor Lead Quantity/Wire Size: @ 0 AWG

9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3524L
Mounting Arrangement: F1
Power Factor: 80
Product Family: WD All SD Non-Encapsulated
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

Current @ Voltage: 11.600 A @ 115.0 V

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: VFSWDL3509 - 1HP,3450RPM,1PH,60HZ,56C,3524L,TEFC,F1,N

5.800 A @ 230.0 V
Design Code: N
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10