Baldor VFDL3610TM Product Information Sheet
Product Information Packet
VFDL3610TM
3HP,1750RPM,1PH,60HZ,184TC,3640LC,TEFC,F
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: VFDL3610TM - 3HP,1750RPM,1PH,60HZ,184TC,3640LC,TEFC,F
Part Detail
Revision: P Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGY739 CD Diagram: CD0002A02 Mfg Plant:
Mech. Spec: 36Q159 Layout: 36LYQ159 Poles: 04 Created Date: 12-03-2013
Base: N Eff. Date: 09-07-2017 Leads: 2#14 A PH,3#16 B&J
Specs
Catalog Number: VFDL3610TM
Enclosure: TEFC
Frame: 184TC
Frame Material: Steel
Output @ Frequency: 3.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 15.500 A @ 230.0 V
KVA Code: M
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 2 @ 14 AWG, A PH
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3640LC
Mounting Arrangement: F1
Power Factor: 76
Product Family: General Purpose
Product Type: FARM DUTY
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Design Code: L
Shaft Rotation: Reversible
Page 2 of 10
Product Information Packet: VFDL3610TM - 3HP,1750RPM,1PH,60HZ,184TC,3640LC,TEFC,F
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Manual Thermal Overload
Winding Thermal 1 Location: KO
Winding Thermal 2: None
Page 3 of 10
Loading...