Baldor VFDL3501M Product Information Sheet

Product Information Packet

VFDL3501M

.33HP,1725RPM,1PH,60HZ,56C,3414L,TEFC,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VFDL3501M - .33HP,1725RPM,1PH,60HZ,56C,3414L,TEFC,F1

Part Detail

Revision: G Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGW721 CD Diagram: CD0008 Mfg Plant:
Mech. Spec: 34M372 Layout: 34LYM372 Poles: 04 Created Date: 11-26-2013
Base: N Eff. Date: 11-12-2018 Leads: 7#18

Specs

Catalog Number: VFDL3501M
Enclosure: TEFC
Frame: 56C
Frame Material: Steel
Output @ Frequency: .330 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Inverter Code: Not Inverter
KVA Code: L
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 7 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3414L
Mounting Arrangement: F1
Power Factor: 60
Product Family: General Purpose
Product Type: FARM DUTY
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

Current @ Voltage: 3.000 A @ 230.0 V

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: VFDL3501M - .33HP,1725RPM,1PH,60HZ,56C,3414L,TEFC,F1

3.600 A @ 208.0 V

6.000 A @ 115.0 V
Design Code: N
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Manual Thermal Overload
Winding Thermal 1 Location: KO
Winding Thermal 2: None

Page 3 of 10