Baldor VEM7014-5 Product Information Sheet
Product Information Packet
VEM7014-5
1HP,1760RPM,3PH,60HZ,56C,3520M,XPFC,F1,N
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: VEM7014-5 - 1HP,1760RPM,3PH,60HZ,56C,3520M,XPFC,F1,N
Part Detail
Revision: B Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGM849 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 35E374 Layout: 35LYE374 Poles: 04 Created Date: 09-30-2015
Base: N Eff. Date: 08-08-2017 Leads: 3#18
Specs
Catalog Number: VEM7014-5
Enclosure: XPFC
Frame: 56C
Frame Material: Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 575.0 V @ 60 HZ
XP Class and Group: CLI GP D; CLII GP F,G
XP Division: Division I
Agency Approvals: CSA
CSA EEV
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
KVA Code: L
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: X3520M
Mounting Arrangement: F1
Power Factor: 71
Product Family: Hazardous Location Motor
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Current @ Voltage: 1.200 A @ 575.0 V
Shaft Rotation: Reversible
Page 2 of 10
Product Information Packet: VEM7014-5 - 1HP,1760RPM,3PH,60HZ,56C,3520M,XPFC,F1,N
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C
Page 3 of 10
Loading...