Baldor VEM3159T Product Information Sheet

Product Information Packet

VEM3159T

1.5HP,1170RPM,3PH,60HZ,145TC,3628M,ODP,F

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VEM3159T - 1.5HP,1170RPM,3PH,60HZ,145TC,3628M,ODP,F

Part Detail

Revision: D Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGS949 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 36M655 Layout: 36LYM655 Poles: 06 Created Date: 04-27-2015
Base: N Eff. Date: 04-08-2019 Leads: 9#16

Specs

Catalog Number: VEM3159T
Enclosure: ODP
Frame: 145TC
Frame Material: Steel
Output @ Frequency: 1.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA EEV

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)

Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3628M
Mounting Arrangement: F1
Power Factor: 64
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None

Blower: None

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: VEM3159T - 1.5HP,1170RPM,3PH,60HZ,145TC,3628M,ODP,F

Current @ Voltage: 2.500 A @ 460.0 V

5.000 A @ 230.0 V

5.100 A @ 208.0 V
Design Code: B
Drip Cover: Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10