Baldor VEL11313 Product Information Sheet

Product Information Packet

VEL11313

1.5HP,3480RPM,1PH,60HZ,56C,3532LC,OPEN,F

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VEL11313 - 1.5HP,3480RPM,1PH,60HZ,56C,3532LC,OPEN,F

Part Detail

Revision: M Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGN673 CD Diagram: CD0055 Mfg Plant:
Mech. Spec: 35E4016 Layout: 35LYE4016 Poles: 02 Created Date: 09-24-2014
Base: N Eff. Date: 05-31-2018 Leads: 6#16

Specs

Catalog Number: VEL11313
Enclosure: OPEN
Frame: 56C
Frame Material: Steel
Output @ Frequency: 1.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

115.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Insulation Class: B
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 6 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3532LC
Mounting Arrangement: F1
Power Factor: 99
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

Current @ Voltage: 11.800 A @ 115.0 V

Shaft Extension Location: Pulley End

Page 2 of 9

Product Information Packet: VEL11313 - 1.5HP,3480RPM,1PH,60HZ,56C,3532LC,OPEN,F

5.900 A @ 230.0 V

7.800 A @ 208.0 V
Design Code: L
Drip Cover: Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 9