Baldor VEBM3558T-5D Product Information Sheet

Product Information Packet

VEBM3558T-5D

2HP,1755RPM,3PH,60HZ,145TC,3528M,TEFC,F3

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VEBM3558T-5D - 2HP,1755RPM,3PH,60HZ,145TC,3528M,TEFC,F3

Part Detail

Revision: K Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGN956 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 35X050 Layout: 35LYX050 Poles: 04 Created Date: 06-21-2013
Base: N Eff. Date: 08-22-2019 Leads: 3#18

Specs

Catalog Number: VEBM3558T-5D
Enclosure: TEFC
Frame: 145TC
Frame Material: Steel
Output @ Frequency: 2.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 575.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA EEV

UR
WEEE
CSA

CE
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting

Inverter Code: Inverter Ready
IP Rating: NONE
KVA Code: L
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3528M
Mounting Arrangement: F3
Power Factor: 75
Product Family: General Purpose
Product Type: D-SERIES BRAKE MOTORS
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None

Bearing Grease Type: Polyrex EM (-20F +300F)

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: VEBM3558T-5D - 2HP,1755RPM,3PH,60HZ,145TC,3528M,TEFC,F3

Blower: None
Current @ Voltage: 2.300 A @ 575.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Fan Housing Cover For Brake
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10