Product Information Packet
VCP4111T
25HP,1180RPM,3PH,60HZ,324TC,1252M,TEFC
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: VCP4111T - 25HP,1180RPM,3PH,60HZ,324TC,1252M,TEFC
Part Detail
Revision: E Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 12WGX418 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 12E386 Layout: 12LYE386 Poles: 06 Created Date:
Base: N Eff. Date: 06-08-2011 Leads: 9#8
Specs
Catalog Number: VCP4111T
Enclosure: TEFC
Frame: 324TC
Frame Material: Iron
Output @ Frequency: 25.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
460.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 31.000 A @ 460.0 V
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 8 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 1252M
Mounting Arrangement: F1
Power Factor: 81
Product Family: Chemical Processing (Not DC)
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
62.000 A @ 230.0 V
Shaft Extension Location: Pulley End
Page 2 of 7
Product Information Packet: VCP4111T - 25HP,1180RPM,3PH,60HZ,324TC,1252M,TEFC
72.000 A @ 208.0 V
Design Code: B
Drip Cover: Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Page 3 of 7
Product Information Packet: VCP4111T - 25HP,1180RPM,3PH,60HZ,324TC,1252M,TEFC
AC Induction Motor Performance Data
Record # 3497 - Typical performance - not guaranteed values
Winding: 12WGX418-R001 Type: 1252M Enclosure: TEFC
Nameplate Data
460 V, 60 Hz:
High Voltage Connection
Rated Output (HP) 25 Full Load Torque 111 LB-FT
Volts 230/460 Start Configuration direct on line
Full Load Amps 62/31 Breakdown Torque 321 LB-FT
R.P.M. 1180 Pull-up Torque 215 LB-FT
Hz 60 Phase 3 Locked-rotor Torque 310 LB-FT
NEMA Design Code B KVA Code H Starting Current 222 A
Service Factor (S.F.) 1.15 No-load Current 11.94 A
NEMA Nom. Eff. 91.7 Power Factor 81 LinelineRes.@25ºC 0.26Ω
Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 48°C
S.F. Amps Temp. Rise @ S.F. Load 63°C
Locked-rotor Power Factor 29
Rotor inertia 9.98 LB-FT2
Load Characteristics 460 V, 60 Hz, 25 HP
% of Rated Load 25 50 75 100 125 150 S.F.
Power Factor 48 69 78 81 83 83 82
Efficiency 87.2 91.6 92.4 92.2 91.7 90.6 91.9
Speed 1196 1192 1187 1182 1177 1171 1179
Line amperes 14.1 18.6 24.45 31.4 38.4 46.7 35.6
Page 4 of 7
Product Information Packet: VCP4111T - 25HP,1180RPM,3PH,60HZ,324TC,1252M,TEFC
Performance Graph at 460V, 60Hz, 25.0HP Typical performance - Not guaranteed values
Page 5 of 7
Product Information Packet: VCP4111T - 25HP,1180RPM,3PH,60HZ,324TC,1252M,TEFC
Page 6 of 7
Product Information Packet: VCP4111T - 25HP,1180RPM,3PH,60HZ,324TC,1252M,TEFC
Page 7 of 7
Loading...