Baldor VCP4100T Product Information Sheet

Product Information Packet

VCP4100T

15HP,1175RPM,3PH,60HZ,284TC,0960M,TEFC

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VCP4100T - 15HP,1175RPM,3PH,60HZ,284TC,0960M,TEFC

Part Detail

Revision: K Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 09WGY218 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 09F911 Layout: 09LYF911 Poles: 06 Created Date:
Base: N Eff. Date: 01-23-2012 Leads: 9#12

Specs

Catalog Number: VCP4100T
Enclosure: TEFC
Frame: 284TC
Frame Material: Iron
Output @ Frequency: 15.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 21.000 A @ 460.0 V

Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 12 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0960M
Mounting Arrangement: F1
Power Factor: 73
Product Family: Chemical Processing (Not DC)
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None

41.000 A @ 230.0 V

Shaft Extension Location: Pulley End

Page 2 of 7

Product Information Packet: VCP4100T - 15HP,1175RPM,3PH,60HZ,284TC,0960M,TEFC

45.400 A @ 208.0 V
Design Code: B
Drip Cover: Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: BRG
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor

Page 3 of 7