
Product Information Packet
VCP3770T
7.5HP,1765RPM,3PH,60HZ,213TC,0729M,TEFC
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VCP3770T - 7.5HP,1765RPM,3PH,60HZ,213TC,0729M,TEFC
Part Detail
Revision: K Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 07WGX835 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 07H902 Layout: 07LYH902 Poles: 04 Created Date: 11-09-2006
Base: N Eff. Date: 09-18-2015 Leads: 9#14
Specs
Catalog Number: VCP3770T
Enclosure: TEFC
Frame: 213TC
Frame Material: Iron
Output @ Frequency: 7.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
230.0 V @ 60 HZ
208.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0729M
Mounting Arrangement: F1
Power Factor: 76
Product Family: Chemical Processing (Not DC)
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Current @ Voltage: 10.300 A @ 460.0 V
Shaft Ground Indicator: No Shaft Grounding
Page 2 of 7

Product Information Packet: VCP3770T - 7.5HP,1765RPM,3PH,60HZ,213TC,0729M,TEFC
20.600 A @ 230.0 V
22.300 A @ 208.0 V
Design Code: A
Drip Cover: Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Drip Cover Mounting
Front Shaft Indicator: None
Heater Indicator: No Heater
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 7

Product Information Packet: VCP3770T - 7.5HP,1765RPM,3PH,60HZ,213TC,0729M,TEFC
AC Induction Motor Performance Data
Record # 49640 - Typical performance - not guaranteed values
Winding: 07WGX835-R020 Type: 0730M Enclosure: XPFC
Nameplate Data
460 V, 60 Hz:
High Voltage Connection
Rated Output (HP) 7.5//5 Full Load Torque 22.23 LB-FT
Volts 230/460//190/380 Start Configuration direct on line
Full Load Amps 20.6/10.3//17.8/8.9 Breakdown Torque 71.56 LB-FT
R.P.M. 1765//1470 Pull-up Torque 31.54 LB-FT
Hz 60//50 Phase 3 Locked-rotor Torque 47.06 LB-FT
NEMA Design Code A KVA Code J Starting Current 72.23 A
Service Factor (S.F.) 1 No-load Current 5.28 A
NEMA Nom. Eff. 89.5 Power Factor 76 LinelineRes.@25ºC 1.5Ω
Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 65°C
Locked-rotor Power Factor 39.7
Rotor inertia 0.738 LB-FT2
Load Characteristics 460 V, 60 Hz, 7.5 HP
% of Rated Load 25 50 75 100 125 150
Power Factor 37 59 71 77 80 83
Efficiency 79.8 87.3 89.4 90.2 89.3 87.6
Speed 1792 1785 1776 1767 1757 1746
Line amperes 5.63 6.7 8.25 10.09 12.14 14.42
Page 4 of 7

Product Information Packet: VCP3770T - 7.5HP,1765RPM,3PH,60HZ,213TC,0729M,TEFC
Performance Graph at 460V, 60Hz, 7.5HP Typical performance - Not guaranteed values
Page 5 of 7

Product Information Packet: VCP3770T - 7.5HP,1765RPM,3PH,60HZ,213TC,0729M,TEFC
Page 6 of 7

Product Information Packet: VCP3770T - 7.5HP,1765RPM,3PH,60HZ,213TC,0729M,TEFC
Page 7 of 7