Page 1
Product Information Packet
VCP3769T-4
7.5HP,3450RPM,3PH,60HZ,213TC,0723M,TEFC
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Page 2
Product Information Packet: VCP3769T-4 - 7.5HP,3450RPM,3PH,60HZ,213TC,0723M,TEFC
Part Detail
Revision: U Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 07WGW199 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 07H024 Layout: 07LYH024 Poles: 02 Created Date:
Base: N Eff. Date: 01-15-2010 Leads: 3#14
Specs
Catalog Number: VCP3769T-4
Enclosure: TEFC
Frame: 213TC
Frame Material: Iron
Output @ Frequency: 7.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 9.100 A @ 460.0 V
Design Code: B
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0723M
Mounting Arrangement: F1
Power Factor: 92
Product Family: Chemical Processing (Not DC)
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Drip Cover: No Drip Cover
Shaft Slinger Indicator: Shaft Slinger
Page 2 of 7
Page 3
Product Information Packet: VCP3769T-4 - 7.5HP,3450RPM,3PH,60HZ,213TC,0723M,TEFC
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 7
Page 4
Product Information Packet: VCP3769T-4 - 7.5HP,3450RPM,3PH,60HZ,213TC,0723M,TEFC
AC Induction Motor Performance Data
Record # 692 - Typical performance - not guaranteed values
Winding: 07WGW199-R001 Type: 0723M Enclosure: TEFC
Nameplate Data
460 V, 60 Hz:
Single Voltage Motor
Rated Output (HP) 7.5 Full Load Torque 11.3 LB-FT
Volts 460 Start Configuration direct on line
Full Load Amps 9.1 Breakdown Torque 42 LB-FT
R.P.M. 3450 Pull-up Torque 25 LB-FT
Hz 60 Phase 3 Locked-rotor Torque 28 LB-FT
NEMA Design Code B KVA Code H Starting Current 70 A
Service Factor (S.F.) 1.15 No-load Current 2.6 A
NEMA Nom. Eff. 84 Power Factor 92 LinelineRes.@25ºC 1.99Ω
Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 74°C
S.F. Amps Temp. Rise @ S.F. Load 90°C
Locked-rotor Power Factor 46
Rotor inertia 0.214 LB-FT2
Load Characteristics 460 V, 60 Hz, 7.5 HP
% of Rated Load 25 50 75 100 125 150 S.F.
Power Factor 72 86 91 92 93 94 93
Efficiency 71.6 80.7 83.1 83.5 82.6 81.6 82.9
Speed 3562 3531 3499 3468 3424 3390 3442
Line amperes 3.7 5.3 7 9 11.2 13.1 10.3
Page 4 of 7
Page 5
Product Information Packet: VCP3769T-4 - 7.5HP,3450RPM,3PH,60HZ,213TC,0723M,TEFC
Performance Graph at 460V, 60Hz, 7.5HP Typical performance - Not guaranteed values
Page 5 of 7
Page 6
Product Information Packet: VCP3769T-4 - 7.5HP,3450RPM,3PH,60HZ,213TC,0723M,TEFC
Page 6 of 7
Page 7
Product Information Packet: VCP3769T-4 - 7.5HP,3450RPM,3PH,60HZ,213TC,0723M,TEFC
Page 7 of 7
Loading...