Baldor VCP3764T Product Information Sheet

Product Information Packet

VCP3764T

3HP,1160RPM,3PH,60HZ,213TC,0729M,TEFC,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VCP3764T - 3HP,1160RPM,3PH,60HZ,213TC,0729M,TEFC,F1

Part Detail

Revision: L Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 07WGX216 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 07H902 Layout: 07LYH902 Poles: 06 Created Date:
Base: N Eff. Date: 09-22-2015 Leads: 9#14

Specs

Catalog Number: VCP3764T
Enclosure: TEFC
Frame: 213TC
Frame Material: Iron
Output @ Frequency: 3.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ

208.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Insulation Class: F
Inverter Code: Not Inverter
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0729M
Mounting Arrangement: F1
Power Factor: 63
Product Family: Chemical Processing (Not DC)
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End

Current @ Voltage: 10.200 A @ 230.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 7

Product Information Packet: VCP3764T - 3HP,1160RPM,3PH,60HZ,213TC,0729M,TEFC,F1

10.300 A @ 208.0 V

5.100 A @ 460.0 V
Design Code: B
Drip Cover: Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Drip Cover Mounting
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 7