
Product Information Packet
VCP2332T
10HP,1170RPM,3PH,60HZ,256TC,0936M,TEFC
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VCP2332T - 10HP,1170RPM,3PH,60HZ,256TC,0936M,TEFC
Part Detail
Revision: K Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 09WGY225 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 09T04 Layout: 09LYT004 Poles: 06 Created Date:
Base: N Eff. Date: 09-09-2010 Leads: 9#12
Specs
Catalog Number: VCP2332T
Enclosure: TEFC
Frame: 256TC
Frame Material: Iron
Output @ Frequency: 10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
460.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 15.000 A @ 460.0 V
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 12 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0936M
Mounting Arrangement: F1
Power Factor: 71
Product Family: Chemical Processing (Not DC)
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
30.000 A @ 230.0 V
Shaft Extension Location: Pulley End
Page 2 of 7

Product Information Packet: VCP2332T - 10HP,1170RPM,3PH,60HZ,256TC,0936M,TEFC
31.000 A @ 208.0 V
Design Code: B
Drip Cover: Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Page 3 of 7

Product Information Packet: VCP2332T - 10HP,1170RPM,3PH,60HZ,256TC,0936M,TEFC
AC Induction Motor Performance Data
Record # 1912 - Typical performance - not guaranteed values
Winding: 09WGY225-R001 Type: 0936M Enclosure: TEFC
Nameplate Data
460 V, 60 Hz:
High Voltage Connection
Rated Output (HP) 10 Full Load Torque 45.04 LB-FT
Volts 230/460 Start Configuration direct on line
Full Load Amps 30.6/15.3 Breakdown Torque 139 LB-FT
R.P.M. 1175 Pull-up Torque 57.52 LB-FT
Hz 60 Phase 3 Locked-rotor Torque 85.22 LB-FT
NEMA Design Code A KVA Code H Starting Current 88.29 A
Service Factor (S.F.) 1.15 No-load Current 8.49 A
NEMA Nom. Eff. 87.5 Power Factor 70 LinelineRes.@25ºC 1.05Ω
Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 54°C
S.F. Amps Temp. Rise @ S.F. Load 64°C
Locked-rotor Power Factor 30.4
Rotor inertia 2.89 LB-FT2
Load Characteristics 460 V, 60 Hz, 10 HP
% of Rated Load 25 50 75 100 125 150 S.F.
Power Factor 33 53 66 70 78 79 75
Efficiency 81.3 86.9 88.4 88.5 88.1 87.2 88.3
Speed 1195 1189 1184 1179 1182 1165 1181
Line amperes 9.01 10.31 12.14 15.31 17.29 20.29 16.5
Page 4 of 7

Product Information Packet: VCP2332T - 10HP,1170RPM,3PH,60HZ,256TC,0936M,TEFC
Performance Graph at 460V, 60Hz, 10.0HP Typical performance - Not guaranteed values
Page 5 of 7

Product Information Packet: VCP2332T - 10HP,1170RPM,3PH,60HZ,256TC,0936M,TEFC
Page 6 of 7

Product Information Packet: VCP2332T - 10HP,1170RPM,3PH,60HZ,256TC,0936M,TEFC
Page 7 of 7