Baldor VBM3542-5 Product Information Sheet

Product Information Packet

VBM3542-5

.75HP,1750RPM,3PH,60HZ,56C,3516M,TENV,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: VBM3542-5 - .75HP,1750RPM,3PH,60HZ,56C,3516M,TENV,F1

Part Detail

Revision: E Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGN546 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 35E050 Layout: 35LYE050 Poles: 04 Created Date: 08-05-2012
Base: N Eff. Date: 06-29-2018 Leads: 3#18

Specs

Catalog Number: VBM3542-5
Enclosure: TENV
Frame: 56C
Frame Material: Steel
Output @ Frequency: .750 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 575.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 1.900 A @ 575.0 V

KVA Code: M
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3516M
Mounting Arrangement: F1
Power Factor: 74
Product Family: General Purpose
Product Type: BRAKE MOTOR
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding

Design Code: B

Shaft Rotation: Reversible

Page 2 of 10

Product Information Packet: VBM3542-5 - .75HP,1750RPM,3PH,60HZ,56C,3516M,TENV,F1

Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Brake Mounting
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter

Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10