Baldor RL1205A Product Information Sheet

Product Information Packet

RL1205A

.33HP,3450RPM,1PH,60HZ,48,3413L,OPEN,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: RL1205A - .33HP,3450RPM,1PH,60HZ,48,3413L,OPEN,F1

Part Detail

Revision: W Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WG0649 CD Diagram: CD0052 Mfg Plant:
Mech. Spec: 34K014 Layout: 34LYK014 Poles: 02 Created Date:
Base: RS Eff. Date: 02-16-2017 Leads: 7#18

Specs

Catalog Number: RL1205A
Frame: 48
Frame Material: Steel
Output @ Frequency: .330 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

115.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Resilient
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 6.000 A @ 115.0 V

3.500 A @ 208.0 V

Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 7 @ 18 AWG
Motor Lead Exit: Terminal Panel
Motor Lead Termination: Flying Leads
Motor Type: 3413L
Mounting Arrangement: F1
Power Factor: 68
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Resilient Mount
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding

3.000 A @ 230.0 V

Shaft Rotation: Reversible: Connected Standard

Page 2 of 10

Product Information Packet: RL1205A - .33HP,3450RPM,1PH,60HZ,48,3413L,OPEN,F1

Design Code: N
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Resilient Mount
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B

Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB

Page 3 of 10