Baldor RHM3162TA Product Information Sheet
Product Information Packet
RHM3162TA
5HP,3450RPM,3PH,60HZ,56HZ,3535M,OPEN,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: RHM3162TA - 5HP,3450RPM,3PH,60HZ,56HZ,3535M,OPEN,F1
Part Detail
Revision: AM Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGW495 CD Diagram: CD0007 Mfg Plant:
Mech. Spec: 35J829 Layout: 35LYJ829 Poles: 02 Created Date: 06-22-2007
Base: RS Eff. Date: 09-24-2015 Leads: 12#18
Specs
Catalog Number: RHM3162TA
Frame: 56HZ
Frame Material: Steel
Output @ Frequency: 5.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 208.0 V @ 60 HZ
230.0 V @ 60 HZ
460.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Resilient
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 6.500 A @ 460.0 V
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 12 @ 18 AWG
Motor Lead Exit: Terminal Panel
Motor Lead Termination: Flying Leads
Motor Type: 3535M
Mounting Arrangement: F1
Power Factor: 90
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Resilient Mount
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
13.500 A @ 208.0 V
Shaft Rotation: Reversible
Page 2 of 9
Product Information Packet: RHM3162TA - 5HP,3450RPM,3PH,60HZ,56HZ,3535M,OPEN,F1
13.000 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Terminal Panel
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Do Not Use Eve-Not Valiid
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB
Winding Thermal 2: None
Page 3 of 9
Loading...