Baldor PL3514M Product Information Sheet
Product Information Packet
PL3514M
1.5HP,1725RPM,1PH,60HZ,56,3535LC,TEFC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: PL3514M - 1.5HP,1725RPM,1PH,60HZ,56,3535LC,TEFC,F1
Part Detail
Revision: AK Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGY860 CD Diagram: CD0016A02 Mfg Plant:
Mech. Spec: 35H229 Layout: 35LYH229 Poles: 04 Created Date:
Base: RG Eff. Date: 04-08-2016 Leads: 7#18,1#14 #4TH
Specs
Catalog Number: PL3514M
Enclosure: TEFC
Frame: 56
Frame Material: Steel
Output @ Frequency: 1.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ
230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Inverter Code: Not Inverter
KVA Code: J
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 7 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3535LC
Mounting Arrangement: F1
Power Factor: 98
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Current @ Voltage: 14.000 A @ 115.0 V
Shaft Rotation: Reversible
Page 2 of 11
Product Information Packet: PL3514M - 1.5HP,1725RPM,1PH,60HZ,56,3535LC,TEFC,F1
6.000 A @ 230.0 V
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Do Not Use
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Manual Thermal Overload
Winding Thermal 1 Location: KO
Winding Thermal 2: None
Page 3 of 11
Product Information Packet: PL3514M - 1.5HP,1725RPM,1PH,60HZ,56,3535LC,TEFC,F1
Nameplate NP1257L
CAT.NO.
SPEC. 35H229Y860
HP 1.5
VOLTS 115/230
AMP 14/6
RPM 1725
FRAME 56 HZ 60 PH 1
SER.F. 1.15 CODE J DES L CL B
NEMA-NOM-EFF 82.5 PF 98
RATING 40C AMB-CONT
CC USABLE AT 208V
DE 6205 ODE 6203
ENCL TEFC SN
Page 4 of 11
Loading...